Inspection

Inspection Details

Equipment ID
21349

Inspection Date
1/11/2023

Inspection Type
Alteration

Inspector Name
Conde (Cache) Kinsella

Mechanic Name
Charles Sheriff

Relief Valve Pressure
N/A

Slide

Governor Rope Pull

Door Closing Force
N/A

External ID
d734f8bf-0515-43f4-b899-f7bdbf7849c4

Location

Anna House
12284 De Paul Dr, Bridgeton, MO
Phone: (314) 209-8814

Owner

Attn: The Sarah Community
The Sarah Community
12284 De Paul Dr, Bridgeton, MO 63044
Phone: (000) 000-0000
Email: rgibbons@thesarahcommunity.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Display current state operating certificate.	10/28/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an overspeed valve. A category 5 test shall be performed on the overspeed valve on or before the next annual inspection. The valve shall be sealed and tagged after the category 5 test.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		The fire service phase one key-switch bezel shall be legible. Note: The bezel has been punched through the fixture and shall be repaired or replaced.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	4.5 - Access to Hoistway	8.6.4.14 Hoistway Access Switches		The hoistway access switch at the top landing has been punched through the fixture and shall be repaired or replaced.
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing (Re-Inspect)	x	Overspeed valve failed inspection. Unable to set valve within the acceptable range. The category 5 test still needs to be completed. The valve shall be tagged and sealed after being set within the acceptable range.	2/20/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.11 - Plunger and Cylinder	8.6.5.5 Gland Packings and Seals	x	The hydraulic cylinder is leaking oil excessively. Take corrective action as needed.	2/20/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	8.11.2.2.6 Fire Fighters Operation (Re-Inspection)	x	Fire service jewel is missing in hallway.	2/20/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	2.27.2	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	2/20/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	2.27.2	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	12/28/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	2.27.2	x	Emergency power must be tested annually. (2nd Notice)	9/9/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	3.26.10 (Auxiliary Power)(Re-Inspection)	x	Battery lowering unit has been removed and shall be replaced or a variance applied for. See MO Memorandum 016 for more details.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.

Back