Inspection

Inspection Details

Equipment ID
22067

Inspection Date
4/21/2023

Inspection Type
Annual Inspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name
Richard King

Relief Valve Pressure
NA

Slide
NA

Governor Rope Pull
NA

Door Closing Force
20

External ID
0385c880-3bef-46f7-a6c7-4c598a4f2ff3

Location

MO Baptist Med Ctr - Bldg C
3015 N Ballas Rd, St. Louis, MO
Phone: (314) 996-5166
Email: frank.schaffer@cushwake.com

Owner

Attn: BJC C/O Cushman And Wakefield Eager Rd
BJC C/O Cushman And Wakefield Eager Rd
3009 N Ballas Rd, St. Louis, MO 63131
Phone: (000) 000-0000

Billing

Attn: BJC C/O Cushman And Wakefield Eager Rd
BJC C/O Cushman And Wakefield Eager Rd
8300 Eager Rd, Ste 600, St. Louis, MO 63144
Phone: (314) 996-5346
Email: bjcinvoices@cushwake.com

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	8.11.2.1.1(q)	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	4/8/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	8.11.2.2.6 Fire Fighters Operation (Re-Inspection)	x	Fire service shall be tested to complete the annual inspection.	4/8/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.15 - sign and operating device symbols	8.6.1.6.7		The car operating panel shall be assigned a unique identification a minimum of 1/2" inches in height and of contrasting color to it's background. Note: This car is marked as car 17 everywhere but is marked car 1 at the car station.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	2.7.5.1 Lighting		Permanently installed electric lighting shall be provided in all machinery spaces, machine rooms, control spaces, and control rooms. The illumination shall be not less than 200 lx (19 fc) at the floor level. Note: The lighting fixture in front of the machine room closet door isn't working and shall be repaired or replaced.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.11 Periodic Inspection and Test.	x	All rest required by A17.1 2005 8.11.2 shall be completed. Note: This testing is incomplete. On 10/4/2023 the hoistway was run and the elevator was able to safely lower and hold 125%. All other test have yet to be completed. Neither an annual or a category 5 test were actually completed. In the course of testing a cable came off of a sheave, so the test had to be halted until repairs can be made.

Back