Inspection

Inspection Details

Equipment ID
13414

Inspection Date
8/10/2023

Inspection Type
Reinspection

Inspector Name
Thomas Krug

Mechanic Name
Justin Balsman

Relief Valve Pressure
na

Slide

Governor Rope Pull

Door Closing Force
na

External ID
7f0649ba-2fc3-4e06-af96-e8cc2c6142bb

Location

Wellington Arms Apt III
11317 Sugar Pine Dr, Florissant, MO
Phone: (314) 831-3200

Owner

Attn: Doug Bogaski
New Wellington III LP
63 Kendrick St, Needham MA, MA 24942
Phone: (314) 831-3200
Email: dbogaski@wingatecompanies.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(H) - Machine Rooms	(H)2	x	Pipes conveying liquid, gas, or vapor that cross overhead of elevator equipment or come in close proximity of the equipment shall be guarded or guttered.	8/10/2023
A17.1-2016 : Elevators	3.4 - Top-of-car Clearance, Refuge Space, & Standard Railing	8.7.3.22.2	x	3.4.5Any horizontal area above the car enclosure top and within the railing if supplied which could contain a circle with a diameter of equal to or greater than 350 mm (14 in.) that does not have a vertical clearance of 1 100 mm (43 in.) when the car has reached its maximum upward movement shall be clearly marked. The marking shall consist of alternating 50 mm (2 in.) diagonal red and white stripes. In addition, when markings are provided, sign(s) with the words “DANGER LOW CLEARANCE” shall be prominently posted on the crosshead and be visible from the hoistway entrance(s).	8/10/2023
A17.1-2016 : Elevators	2.10 - Numbering of Elevators, Machines, Controllers, and Disconnect Switches	3.29	x	2.29.1.1 In buildings with more than one elevator, each elevator in the building shall be assigned a unique alphabetic, numeric, or alphanumeric identification. The identification (2inches minimum) shall be painted on, engraved on, or securely attached to or adjacent to the following equipment associated with each elevator or the enclosures housing the following equipment associated with each elevator: (a) the driving machine, (b)controller, (f) disconnecting means, (g) the crosshead, or where there is no crosshead, the car frame, such that it is visible from the hoistway landing (h) the car operating panel, a minimum of 13 mm (0.5 in.) in height (i) on both doorjambs of every elevator entrance at the designated level and alternate level	8/10/2023
A17.1-2016 : Elevators	3.27 - Crosshead Data Plate and Rope Data Tags	3.16	x	Update Crosshead Data Plate to reflect increase in rated speed	8/10/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.15 Car Emg Sys (Phone or alarm not functioning Mandatory Re-Inspection due in 14 days)	x	The Emergency Phone in the car fails to establish two-way communication. No active dial tone.

Back