Inspection

Inspection Details

Equipment ID
261

Inspection Date
8/17/2023

Inspection Type
Annual Inspection

Inspector Name
Thomas Krug

Mechanic Name
Mark Woronowicz

Relief Valve Pressure
430

Slide

Governor Rope Pull

Door Closing Force
22

External ID
b2f7b9d2-50b8-4bf4-87f9-636217436fe6

Location

Quality Inn
1200 Gannon Dr, Festus, MO
Phone: (636) 937-3723
Email: SharlinPatel@yahoo.com

Owner

Attn: Sharlin Patel
Quality Inn
1200 Gannon Dr, Festus, MO 63028
Phone: (636) 933-1999
Email: SharlinPatel@yahoo.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		2) Exposed live parts of motors and controllers operating at 50 volts or more between terminals shall be guarded against accidental contact by enclosure. The breaker enclosure inner panel is not in place. (Protection of Live Parts)	11/8/2018
conversion	conversion	n/a		1) The depth of the working space in the direction of live parts shall not be less than that specified in Table 110.26(A)(1). Distances shall be measured from the exposed live parts or from the enclosure or opening if the live parts are enclosed. Minimum distance is not being met for electrical panel which houses breaker for elevator. Will require a variance.	11/8/2018
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)7		Car door closing force exceeds 30 lbs
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)11 Phone or alarm not functioning ( Mandatory Re-Inspection due in 14 days)	x	Alarm bell in elevator doesn't work	8/25/2020
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		Repair lights in machine room
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		Check pump unit or machine for oil leak and repair
A17.1-2016 : Elevators	3.17 - Door and gate equipment	8.6.4.13	x	At the bottom landing, the gap where the two hoistway door panels meet shall not exceed 3/8"	8/21/2024
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems		The Fire tabs on the gibs need to be bent down to engage with the sill

Back