Inspection

Inspection Details

Equipment ID
18836

Inspection Date
8/15/2023

Inspection Type
5 Year Annual Inspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name
Dustin Arnett

Relief Valve Pressure
640

Slide
NA

Governor Rope Pull
NA

Door Closing Force
24

External ID
bcd0f520-50a1-4768-8799-3242df05ed5f

Location

Rejis Data Center
4255 W Pine Blvd, St. Louis, MO
Phone: (314) 633-0244

Owner

Attn: Rejis Commission
Rejis Commission
4255 W Pine Blvd, St. Louis, MO 63108
Phone: (314) 633-0244
Email: rbradley@rejis.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The pumping unit/controller shall be assigned and marked with a unique identification (alphabetic, numeric, or alphanumeric) with a minimum of 2 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The car identification shall be located adjacent to or on every elevator entrance at the designated level, minimum of 3 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The car identification shall be painted on, engraved, or securely attached to the car operating panel and shall be a minimum of 1/2 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.11 - Disconnecting Means and Control	8.11.2.1.2(k)		Feeder locations for the main branch circuit shall be marked on the disconnect.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an overspeed valve that in not sealed. A category 5 test shall be performed on the overspeed valve on or before the next annual inspection. The valve shall be sealed and tagged after the category 5 test.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	8.11.2.1.1(q)	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	8/15/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		The displayed certificate is expired. A current MO State operating certificate shall be obtained and displayed in the machine room.	9/18/2023

Back