Inspection

Inspection Details

Equipment ID
23272

Inspection Date
11/8/2023

Inspection Type
Annual Inspection

Inspector Name
Curtis Belew

Mechanic Name
Douglas Miller

Relief Valve Pressure
NA

Slide
NA

Governor Rope Pull
NA

Door Closing Force
20F/19R

External ID
e726017d-fdf6-45df-b452-984718a4403d

Location

Anthology of Clayton
8825 Eager Rd, St. Louis, MO
Phone: (314) 961-1700

Owner

Attn: Chuck
Anthology of Clayton
8825 Eager Rd, St. Louis, MO 63144
Phone: (314) 961-1700
Email: claytonviewbod@anthologyseniorliving.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	8.11.2.1.1(f) (Insp code) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	The in car emergency telephone shall be operational.	10/26/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.4.9 Cleaning of Top of Cars		Weights shall not be stored on the car top.	2/18/2021
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.6 - Governor-rope tension devices	8.11.2.1.5(g)		The tail sheave switch shall be wired per the manufactures’ specifications.	1/1/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	1/1/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.7 - Fire Extinguisher	8.11.2.1.2(g)		An ABC fire extinguisher with a current test tag shall be mounted convenient to the top landing door.	1/1/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.27 - Rope fastenings	2.20		Wedge rope socket is anchored incorrectly. When the steel wire rope has been seated in the wedge socket by the load on the rope, the wedge shall be visible, and at least two wire-rope retaining clips shall be provided to attach the termination side to the load-carrying side of the rope. The first clip shall be placed a maximum of 4 times the rope diameter above the socket, and the second clip shall be located within 8 times the rope diameter above the first clip.	8/14/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	8.6.4.7 Cleaning of Pits		Clean the pit of oil, dirt, and debris.	8/14/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	2.27.2	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	10/13/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	8/14/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	4.2 - Hoistway doors	8.6.4.13	x	The top and bottom of horizontally sliding doors shall be provided with a means of retaining the closed door panel in position if the primary guiding means fail. Note: The hoistway door safety retainers are missing from the bottom of the door panel and shall be installed.	1/30/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	8.11.2.2.6 Fire Fighters Operation (Re-Inspection)	x	Phase two fire service operation shall operate as required. The doors are not closing some times on phase two and other times, the car reverts to phase one when it should not.	1/30/2025

Back