Inspection

Inspection Details

Equipment ID
22804

Inspection Date
11/4/2024

Inspection Type
Annual Inspection

Inspector Name
Steven Salabay

Mechanic Name
Jeffrey Miller

Relief Valve Pressure
483

Slide
NA

Governor Rope Pull
NA

Door Closing Force
24

External ID
1a45bf93-0987-419b-9763-0c7d3c6c8818

Location

The Range
14803 Manchester Rd, Ballwin, MO
Phone: (636) 220-1300

Owner

Attn: Sentinal Arms dba The Range - St. Louis West
Sentinal Arms dba The Range - St. Louis West
14803 Manchester Rd, Ballwin, MO 63011
Phone: (636) 220-1300
Email: JHenderson@therangestl.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.35 - Supply Line and Shutoff Valve	3.19.4.1		The oil line shutoff shall be accessible from outside the hoistway. - Re-Inspection Required	6/19/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.32 - Control Valve	3.19.4.4		Manual lowering shall be accessible from outside the hoistway. - Re-Inspection Required	6/19/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.32 - Control Valve	3.19.4.5		Pressure gauge shall be accessible from outside the hoistway. - Re-Inspection Required	6/19/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.37 - Pressure Switch	3.26.8 Pressure Switch	x	Positive pressure switch is required as per 3.26.8	8/7/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	3.4	x	The hoistway pit refuge space area is to be clearly and permanently marked and identified as "Refuge Space" and shall visible from the hoistway and entrance to the pit as required by the Missouri elevator safety board.	8/7/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	3.4	x	A sign with the words, "Danger Low Clearance," including the actual clearance dimension, shall be permanently posted on the power unit and shall be visible from within the pit and entrance to the pit as required by 3.4.1.6 and the Missouri elevator safety board.	8/7/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	3.4	x	Landing blocks and pipe stands shall be stored in the pit according to 8.6.4.7.2.	8/7/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4		Maintenance control program shall be in place.	8/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.5 - Car lighting and receptacles	8.6.4.15 Emergency Lighting	x	The in car emergency lighting shall be operational.	4/19/2021
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an overspeed valve that is unsealed. A category 5 test shall be performed on the valve on or before the next annual inspection.	11/21/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4		The MCP shall not be stored on the top of the car.	11/21/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	2.27.1 Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	The emegency phone shall establish 2-way communication.

Back