Inspection

Inspection Details

Equipment ID
5768

Inspection Date
12/7/2018

Inspection Type
Annual Inspection

Inspector Name
Michial Linenfelser

Mechanic Name
Richard King

Relief Valve Pressure
480

Slide

Governor Rope Pull

Door Closing Force
30

External ID
6271b4e0-e35e-4a03-863a-5c42c3216dca

Location

US Bank
10 N HANLEY RD, CLAYTON, MO

Owner

US Bank
10 N HANLEY RD, CLAYTON, MO 63105-3426

Billing

Attn: US Bank

6701 N ILLINOIS ST, FAIRVIEW HEIGHTS, IL 62208-2019

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		The pit depth exceeds 4 feet and there is no pit ladder provided for accessing the pit. Provide a proper, code-compliant pit ladder with handgrips extending 30 inches above the access floor for safe entry into the pit. The elevator hoistway may not be wide enough to install a pit ladder; a variance may need to be applied for.
conversion	conversion	n/a		The gate switch on the elevator car door shall be adjusted so that when the door is in the closed position, the gap between the leading edge of the door and the strike jamb is no more than 2 inches.
conversion	conversion	n/a		The elevator pit light did not work on the day of inspection, repair for proper illumination of the pit floor.
conversion	conversion	n/a		The sump pump hole in the pit shall be provided with a noncombustible cover that is flush with the pit floor. There is currently no cover provided.
conversion	conversion	n/a		The normal limit switch in the pit shall be adjusted to activate before the elevator touches the buffer springs.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits		The pit depth exceeds 4 feet and there is no pit ladder provided for accessing the pit. Provide a proper, code-compliant pit ladder with handgrips extending 30 inches above the access floor for safe entry into the pit. The elevator hoistway may not be wide enough to install a pit ladder; a variance may need to be applied for.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits		The pit depth exceeds 4 feet and there is no pit ladder provided for accessing the pit. Provide a proper, code-compliant pit ladder with handgrips extending 30 inches above the access floor for safe entry into the pit. The elevator hoistway may not be wide enough to install a pit ladder; a variance may need to be applied for.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of the current state operating certificate shall be displayed in the elevator machine room
A17.1-2016 : Elevators	5.15.2 Unsealed Overspeed Valve	8.6.5.16.5 (Re-Inspect)	x	OSV is not sealed and needs full load test and tripping speed checked. Re-inspection required	12/13/2022
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)		Elevator pit light does not work. The fixture switch shall be provided and accessible from the pit access door.
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of the current state operating certificate shall be displayed in the machine room
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)		Pit light does not work.
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)		Elevator pit light does not work. The fixture switch shall be provided and accessible from the bottom landing hoistway door.
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of the current state operating certificate shall be displayed in the machine room

Back