Inspection

Inspection Details

Equipment ID
22680

Inspection Date
2/3/2025

Inspection Type
Annual Inspection

Inspector Name
Michial Linenfelser

Mechanic Name
Jake Brennan

Relief Valve Pressure
Na

Slide
Na

Governor Rope Pull
Na

Door Closing Force
20

External ID
0d71a208-74e6-4e52-8a8f-a3f2184b74f4

Location

The Orion
4567 West Pine Blvd, St. Louis, MO
Phone: (314) 887-8682
Email: ormanager@theorioncwe.com

Owner

Attn: The Dedicated Orion, LP
The Dedicated Orion, LP
4567 W Pine Blvd, St. Louis, MO 63108
Phone: (314) 887-8682
Email: ormanager@theorioncwe.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		Repair Basement Floor Hall sill trip Hazard	7/9/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	8.6.4.11	x	Counterweights bottom out before car reaches its final limit. Repair	12/16/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4		Written maintenance control program shall be kept on site for each elevator.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.13 - Windows, projections, recesses, and setbacks	8.11.2.1.3(s)		Sill guards are missing at the bottom of all hoistway door landing sills. Guards shall be the length of the car leveling zone, plus 3 inches, and be beveled at an angle between 60 and 75 degrees.
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	Emergency generator testing shall be performed. Re-inspection required	2/3/2025
MO Minimum : Elevators	(H) - Machine Rooms	(H)1		Access to the elevator disconnects shall be unobstructed
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		The door to the elevator disconnects shall be self closing & self locking
MO Minimum : Elevators	(H) - Machine Rooms	(H)4		No flammable materials are to be stored in the elevator disconnect room
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.13 - Windows, projections, recesses, and setbacks	8.11.2.1.3(s)		Sill guards are missing at the bottom of all hoistway door landing sills. Guards shall be the length of the car leveling zone, plus 3 inches, and be beveled at an angle between 60 and 75 degrees. Previous violations from past years.
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	Emergency generator testing shall be performed. Re-inspection required.Previous violations from past years.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.4 - Sills and car floor	2.11.11.1		Repair Bottom Floor Trip hazard at hall sill. Previous violation from past years.

Back