Inspection

Inspection Details

Equipment ID
18882

Inspection Date
12/6/2018

Inspection Type
Annual Inspection

Inspector Name
Paul Karrenbrock

Mechanic Name
Alex Brinkman

Relief Valve Pressure
340

Slide

Governor Rope Pull

Door Closing Force
NA

External ID
38fa8316-3cac-49b5-a01a-ac71a2c6712f

Location

Clark Logistics
3901 UNION BLVD STE 115, SAINT LOUIS, MO

Owner

Attn: Union 70 Partnership
Union 70 Partnership
3901 UNION BLVD STE 104A, SAINT LOUIS, MO 63115
Phone: (314) 884-7038
Email: mpupic@clark-properties.com

Billing

Same as Owner

Violations

Code	Item	Section	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.7 - Car door or gate	8.11.2.1.1(g)	Replace car gate astrigal on front and rear.	12/8/2020
MO Minimum : Elevators	(K) - Car Platforms and Car Slings	(K)4	The elevator crosshead does not have a data plate. Install a data plate and attach to the crosshead.	1/21/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.5.5.2 Oil Leakage Collection	There is a oil recovery unit installed in the pit of this elevator designed to return the oil leakage from the packing gland on the cylinder head. The State of Missouri has determined that this device does not suffice for oil leakage and is only allowed for temporary use until the packing gland can be repaired/replaced. Remove the recovery unit after the packing gland has been repaired/replaced and record the oil loss per A17.1 2016 - 8.6.5.5.7. Please note that the cylinder diameter of this unit is excessively large and a 5 gallon containment system may not be feasible. Recommend a variance be considered.	1/21/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.2.1 Repair Parts	The front elevator gate retiring cam air check device has malfunctioned and shall be repaired.	1/21/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.5.5.2 Oil Leakage Collection	There is a oil recovery unit installed in the pit of this elevator designed to return the oil leakage from the packing gland on the cylinder head. The State of Missouri has determined that this device does not suffice for oil leakage and is only allowed for temporary use until the packing gland can be repaired/replaced. Remove the recovery unit after the packing gland has been repaired/replaced and record the oil loss per A17.1 2016 - 8.6.5.5.7. Please note that the cylinder diameter of this unit is excessively large and a 5 gallon containment system may not be feasible. Recommend a variance be considered.	1/21/2025

Back