Inspection

Inspection Details

Equipment ID
10524

Inspection Date
3/3/2025

Inspection Type
Annual Inspection

Inspector Name
Steven Salabay

Mechanic Name
James Bishop

Relief Valve Pressure
360

Slide
NA

Governor Rope Pull
NA

Door Closing Force
26

External ID
686b31a8-4f3f-49f1-9301-76fae62412ce

Location

Badenfest
8220 N Broadway, St. Louis, MO
Phone: (314) 231-5700

Owner

Attn: Badenfest
The Habitat Company
8220 N Broadway, St. Louis, MO 63147
Phone: (314) 231-5700

Billing

Attn: The Habitat Company
The Habitat Company
4451 Forest Park Ave, St. Louis, MO 63108
Phone: (618) 978-3338
Email: pwerner@slha.org

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(A) - Hoistways	(A)3		The hoistway door tension on the bottom landing shall be adjusted to self-close.	2/7/2020
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)8 Car Lighting		The cab ceiling is of the open egg-crate type, which does not provide protection from the light bulbs should they shatter. The lights shall be guarded by plastic sleeve or some other means to properly protect passengers.	2/7/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13.1(l) Means to restrict hoistway/car door opening (Door Restrictors) (Re-Inspection)	x	The rear car door restrictor device shall be adjusted so that it will properly catch and restrict opening of the car doors to a maximum of 4 inches when the car is away from the landing zone. Reinspection is required.	2/11/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to, as used for all inspections. Upon investigation, it was determined that the proper code should be ASME A17.1 1996 . Provide a proper plate on the front of the controller or mainline disconnect.	2/7/2020
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		The machine room lighting was not operational on the day of inspection. Repair lighting for proper illumination for maintenance and emergency personnel.	2/7/2020
MO Minimum : Elevators	(A) - Hoistways	(A)3		The hoistway door tension on the bottom landing shall be adjusted to self-close.	7/21/2020
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)8 Car Lighting		The cab ceiling is of the open egg-crate type, which does not provide protection from the light bulbs should they shatter. The lights shall be guarded by plastic sleeve or some other means to properly protect passengers.	7/21/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to, as used for all inspections. Upon investigation, it was determined that the proper code should be ASME A17.1 1996. Provide a proper plate on the front of the controller or mainline disconnect.	7/21/2020
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		The machine room lighting was not operational on the day of inspection. Repair lighting for proper illumination for maintenance and emergency personnel.	7/21/2020
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)11 Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	2 way communication is not working. Re-inspection required	9/24/2024
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)11 Phone or alarm not functioning ( Mandatory Re-Inspection due in 14 days)	x	Two-way communication device is not working. Take corrective action and re-test.	4/2/2025
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	4/21/2025

Back