Inspection

Inspection Details

Equipment ID
2499

Inspection Date
4/17/2025

Inspection Type
Annual Inspection

Inspector Name
Paul Karrenbrock

Mechanic Name

Relief Valve Pressure
480

Slide
na

Governor Rope Pull
na

Door Closing Force
12

External ID
a13a81f0-93f9-4433-b0c9-11183f1379bc

Location

Chemistry
E Rollins St at Hitt St, Columbia, MO
Phone: (573) 882-6463

Owner

Attn: Facility Operations
UMC-General Services
180 General Services Bldg, Columbia, MO 65201
Phone: (573) 884-5300
Email: mumuopselevatorin1@missouri.edu

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		emergency light/bell battery dead	5/19/2019
MO Minimum : Elevators	(G)2-Alterations	8.7.2.14.2 Car Enclosure	x	No active telephone line,no emergency light /alarm	5/5/2020
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4		Elevator settling approx 1" IN 15 MIN-close machine room valve	8/30/2021
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4		Check control valve for leackback	8/30/2021
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.5 Code Data Plate		Provide code data plate conforming to sec 8.9	8/30/2021
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(2)(C) Re-Inspection Required to Enforce.	x	2021 violation for 2.32 not corrected. Repair/replace valve as needed. REINSPECTION REQUIRED WITHIN 30days	5/4/2022
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	Auxiliary battery lowering is not working. needs repaired. Re-inspection required	5/14/2024
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		The machine room lighting has been changed to a motion type switch to activate. While this is an energy saving measure, it also is a safety / code concern. Without motion, the switch deactivates the lighting, thereby leaving maintenance personnel with no lighting. Remove motion type switch to a conventional on/off switch.	8/26/2025
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4		The elevator control valve seeped an excessive amount of oil in testing. The control valve shall be repaired or replaced	8/26/2025
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	Auxiliary battery lowering is not working, need repaired. Re-inspection required	8/26/2025

Back