Inspection

Inspection Details

Equipment ID
8857

Inspection Date
4/28/2025

Inspection Type
Annual Inspection

Inspector Name
Thomas Krug

Mechanic Name
Andrew Schmitz

Relief Valve Pressure
220

Slide

Governor Rope Pull

Door Closing Force
25

External ID
db5ac902-a7ce-4a4d-b26c-4baf25d2c8e9

Location

Huvepharma, Inc.
3360 Maury Ave, St. Louis, MO
Phone: (314) 752-8152

Owner

Attn: Huvepharma, Inc.
Huvepharma, Inc.
3360 Maury Ave, St. Louis, MO 63116
Phone: (314) 752-8010
Email: ryan.kent@huvepharma.us

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		pit in need of house keeping	2/20/2019
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		Overspeed valves, where provided, shall be inspected and tested to verify that they will stop the car, traveling down with rated load every 5 years.
MO Minimum : Elevators	(H) - Machine Rooms	(H)4		Machine room floors shall be kept clean and free of grease and oil.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.15 Car Emg Sys (Phone or alarm not functioning Mandatory Re-Inspection due in 14 days)	x	Emergency Phone in car fails to establish two-way communication	4/28/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.15 Car Emg Sys (Phone or alarm not functioning Mandatory Re-Inspection due in 14 days)	x	Emergency Phone in car fails to establish two-way communication
MO Minimum : Elevators	(H) - Machine Rooms	(H)4		Machine room floors shall be kept clean and free of grease and oil. Articles or materials not necessary for the maintenance or operation of the elevator shall not be stored therein.There is a saw dust like material piling up on the pit floor that needs to be swept up
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4.1(a) On-Site Maintenance Records (MCP Records)		A written Maintenance Control Program shall be in place to maintain the equipment in compliance with the requirements of Section 8.6

Back