Inspection

Inspection Details

Equipment ID
10242

Inspection Date
12/18/2018

Inspection Type
Annual Inspection

Inspector Name
Kurt Zimmerman

Mechanic Name
Robert Kehm

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
29

External ID
80d2e6bb-98d0-44c0-8802-287f6d26a59e

Location

Metropolitan Square
211 N BROADWAY, SAINT LOUIS, MO

Owner

Metropolitan Square LLC
211 N BROADWAY, SAINT LOUIS, MO 63102-2721

Billing

Attn: Jones Lang LaSalle

211 N BROADWAY STE 1290, SAINT LOUIS, MO 63102-2748

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)12 (Re- Inspection)	x	Governor rope must be replaced. Re-inspection required	1/18/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		Two shackle springs are broken, need to be replaced
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1- 8.6.4.15 Car Emergency Systems (Emergency Light) (Re-Inspection)	x	Emergency light not working. Re-inspection required	1/18/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Counterweights need to be tested. Re-inspection required	1/18/2023
MO Minimum : Elevators	(S) - Fire Service	8.11.2.2.6 Firefighters’ Emergency Operation (Re-Inspection)	x	Fire service needs to be tested. Re-inspection required	1/18/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Has not completed the Category 5 Inspection for 2022. The following issues are unresolved: 1 - Counterweight buffer has not been tested. Unable to complete due to seismic construction. 2 - Car buffer has not been tested. Unable to complete due to seismic construction. 3 - The governor rope has been damaged and shall be replaced. 4 - Fireman’s emergency service phase I and II have not been tested. Unable to reinspect due to being out of service for repair.	5/9/2023
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)7		Unable to test door pressure due damage incurred from striking the seismic bolts in the hoistway.
A17.1-2016 : Elevators	3.14 - Hoistway clearances	2.4		Seismic strengthening of the elevator hoistway has been performed. This has resulted in a number of issues listed. 1- No alteration permit has been applied for. 2-The elevator car has struck the seismic bolts that have been added to the hoistway. Clearances shall be checked. 3-Elevator car door header has been damaged by striking seismic bolts in the hoistway. 4-The seismic contractor (Paric) shall finish the work in the hoistway and certify its completion before the elevator can be returned to service. Numerous nuts were observed that were not properly secured and could potential cause damage to the elevator and the occupants inside.
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Fire service phase 1 and 2 and emergency generator power operation still needs to be tested to complete 5 year inspection	12/4/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts		Hoist rope shackle spring is broken. Replace same
A17.1-2016 : Elevators	3.14 - Hoistway clearances	2.4		Seismic strengthening of the elevator hoistway has been performed. This has resulted in a number of issues listed. 1- No alteration permit has been applied for. 2-The elevator car has struck the seismic bolts that have been added to the hoistway. Clearances shall be checked. 3-Elevator car door header has been damaged by striking seismic bolts in the hoistway. 4-The seismic contractor (Paric) shall finish the work in the hoistway and certify its completion before the elevator can be returned to service. Numerous nuts were observed that were not properly secured and could potential cause damage to the elevator and the occupants inside.
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of the current operating certificate shall be displayed in the machine room
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts		Down final limit switch roller is damaged and needs replacing
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts		Suspension rope shackle spring is broken in machine room, needs to be replaced
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Test elevator for operation on emergency power. Re-inspection required
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)11 Phone or alarm not functioning ( Mandatory Re-Inspection due in 14 days)	x	Elevator cab phone is not working on battery backup, needs repaired. Re-inspection required

Back