Inspection

Inspection Details

Equipment ID
27049

Inspection Date
8/14/2025

Inspection Type
Reinspection

Inspector Name
Christopher "RED" Staton

Mechanic Name
Tim Switzer

Relief Valve Pressure
NA

Slide
NA

Governor Rope Pull
NA

Door Closing Force
NA

External ID
119a7d72-e716-430a-a198-3c0ff702182d

Location

Hardin Middle School
1960 Elm St, St. Charles, MO
Phone: (636) 443-4000
Email: whitney.davis@tkelevator.com

Owner

Attn: City of St Charles School District
City of St Charles School District
400 N 6th St, St. Charles, MO 63301
Phone: (636) 443-4000
Email: scsdfac@stcharlessd.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
A17.1-2016 : Elevators	1.4 - Sills and car floor	2.5.1.4	x		Install and verify cab floor covering.	8/14/2025
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.10 Acceptance Inspection and Test	x		Verify ride/leveling quality.	8/14/2025
A17.1-2016 : Elevators	2.3 - Lighting and receptacles	2.7.9.1	x		Machine space (2nd landing) lighting shall be atleast 19 fc.	8/14/2025
A17.1-2016 : Elevators	2.16 - Overhead Beam and Fastenings	2.9.1	x		Top of hoistway hoisting beam needs capacity labeled.	8/14/2025
A17.1-2016 : Elevators	3.10 - Hoistway construction	3.1	x		Fire caulk/fill holes and voids in hoistway walls.	8/14/2025
A17.1-2016 : Elevators	3.12 - Pipes, wiring, and ducts	3.8	x		Top of hoistway light switch box is missing hole/knockout cover.	8/14/2025
A17.1-2016 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.5	x		Pit lighting shall be at least 10fc.	8/14/2025
A17.1-2016 : Elevators	3.12 - Pipes, wiring, and ducts	3.8	x		Pit sump pump "Oil Tector" shall be relocated outside of pit area.	8/14/2025
A17.1-2016 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	3.27	x	x	Top of hoistway smoke detector shall be within 12" of ceiling.	8/14/2025
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		Need to test top and bottom overtravel measurements, 3D edge, remainder of pit equipment and clearances.	8/14/2025

Back