Inspection

Inspection Details

Equipment ID
7126

Inspection Date
12/8/2025

Inspection Type
Annual Inspection

Inspector Name
Christopher "RED" Staton

Mechanic Name
Richard King

Relief Valve Pressure
NA

Slide
Softset

Governor Rope Pull
NA

Door Closing Force
12

External ID
9b90a93d-4be4-49cb-a9a1-135e601542ed

Location

Gallery 515
515 Olive St, St. Louis, MO
Phone: (314) 241-5964

Owner

Attn: Brandonview LLC
Brandonview LLC
515 Olive St, Ste 106, St. Louis, MO 63101
Phone: (314) 421-4500
Alt Phone: (314) 328-7900
Email: manager@rentgallery515.com

Billing

Attn: Brandonview LLC
Brandonview LLC
515 Olive St, Ste 106, St. Louis, MO 63101
Phone: (314) 421-4500
Alt Phone: (314) 328-7900
Email: manager@rentgallery515.com

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.7 - Fire Extinguisher	8.11.2.1.2(g)			Provide a current inspected fire extinguisher in the machine room.	2/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	8.11.2.1.2(c)			Provide code compliant machine room lighting.	2/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.6 - Ventilation	8.11.2.1.2(f)			Make machine room exhaust fans code compliant.	2/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits			Provide code compliant pit lighting.	2/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits			Pit door must be self locking type.	2/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	8.11.2.1.4(l)	x	x	In car fireman's return hat shall light when recalled.	12/17/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.7 - Fire Extinguisher	8.11.2.1.2(g)			An ABC fire extinguisher with a current test tag shall be mounted in the machine room located convenient to the access door.	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate			A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	3/15/2022
A17.1-2016 : Elevators	1.4 - Sills and car floor	2.11.10.2			Illumination at Landing Sills: The building corridors shall be so lighted that the illumination at the landing sills, when an elevator is in service, shall be not less than 10 fc. Note: Some lobbies are under construction, and not lighted.	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	8.11.2.1.2(j)			The buffers, pit channels, and/or the compensating sheave assembly, which are visible from the pit access door, shall be marked with the car identification number with a minimum of 2 inches in height and of a contrasting color to its background.	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4			A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.9 - Floor and emergency identification numbering	2.29.1			The identification number for each elevator shall be painted on, engraved, or securely attached adjacent to or on every elevator entrance at the designated level, and shall be a minimum of 3 inches in height.	7/8/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.10 - Hoistway construction	2.1			Hoistways containing passenger elevators shall be fully enclosed and the enclosure shall be of solid construction. The large hole in the hoistway above the vent in the overhead shall be sealed using approved material.	7/8/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.28 - Counterweight and counterweight buffer	2.21			Top left and bottom right counterweight roller shall be replaced.	7/8/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	x		Current State Operating Permit shall be displayed in the Equipment Room in a non-combustible frame. (previously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.4 - Sills and car floor	2.11.11.1	x		The building corridors shall be so lighted that the illumination at the landing sills, when an elevator is in service, shall be not less than 10 fc. (previously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	2.7.5.1	x		Permanent electric lighting shall be provided in all machine rooms and machinery spaces. The illumination shall be not less than 19 foot-candles at the floor level in the Primary Machine room. (previously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.3.2	x		The buffers, Governor tail sheave, and/or the compensating sheave assembly, which are visible from the pit access door, shall be marked with the car identification number with a minimum of 2 inches in height and of a contrasting color to its background. (perviously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.10 - Hoistway construction	2.1	x		Hoistways containing passenger elevators shall be fully enclosed and the enclosure shall be of solid construction. The large hole in the hoistway above the vent in the overhead shall be sealed using approved material. (previously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.28 - Counterweight and counterweight buffer	2.21	x		Top left and bottom right counterweight roller shall be replaced. (previously cited re-inspection to enforce)
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	8.6.4.2	x		Governor rope tail sheave is covered in "rope dust". Investigate possible damage to Governor Rope and/or tail sheave.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.10 - Compensating chains, ropes, and sheaves	2.26.2.3			Compensation Weight Sheave is nearing end of tra.vel(<1.5"). Shorten Comp Ropes as needed to maintain sufficient remaining travel and activate switching

Back