Inspection

Inspection Details

Equipment ID
1876

Inspection Date
2/3/2026

Inspection Type
Annual Inspection

Inspector Name
Chad Hackstadt

Mechanic Name
Michael Vantassel

Relief Valve Pressure
NA

Slide
Softset

Governor Rope Pull
NA

Door Closing Force
23

External ID
3b860688-3dde-46e9-b6df-f9eb9aeacc31

Location

Ameren Missouri
1901 Chouteau Ave, St. Louis, MO
Phone: (314) 363-4794

Owner

Attn: Ameren
Ameren U E
1901 Chouteau Ave, St. Louis, MO 63103
Phone: (314) 554-3368
Email: facilitiesMgmt&const@ameren.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		The elevator machine room door shall be self-closing/self-locking and shall be operable from the interior space without the use of a key. Repair the self-closing device.	5/13/2025
A17.1-2016 : Elevators	1.20 - Earthquake Inspection and Tests (Seismic Risk Zone 2 or Greater)	8.11.2.1.1(y)		The seismic detection operation of the elevator did not operate as designed. The elevator failed to open the car door automatically as required when the counterweight detection device was activated. Repair the programming of this feature to operate as required.	5/13/2025
MO Minimum : Elevators	(F) - Electrical Switches	(F)2	x	The final limit switch in the pit shall be adjusted to activate before the buffer switch is activated. Currently the counterweight measurement is 3.5” and is activating before the normal directional and final limit switch activates.	1/24/2024
MO Minimum : Elevators	(I) - Pits	(I)7		The enclosed stop switch in the pit shall meet A17.1 1995 which requires the switch to be marked red.	5/13/2025
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Post current State Elevator Certificate.	5/9/2025
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Post current State Elevator Certificate.	5/9/2025
A17.1-2016 : Elevators	3.23 - Suspension Means	8.6.4.1	x	Minimum bottom clearance for counterweights shall measure no less than 6.5 inches. Measurements for this inspection proved 5 inches. Ropes shall be shortened.

Back