Inspection

Inspection Details

Equipment ID
18836

Inspection Date
3/4/2026

Inspection Type
Annual Inspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name
Dustin Arnett

Relief Valve Pressure
620

Slide
NA

Governor Rope Pull
NA

Door Closing Force
21

External ID
77e9f21e-e6df-47e7-a0ea-970580d31c1e

Location

Rejis Data Center
4255 W Pine Blvd, St. Louis, MO
Phone: (314) 633-0244

Owner

Attn: Rejis Commission
Rejis Commission
4255 W Pine Blvd, St. Louis, MO 63108
Phone: (314) 633-0244
Email: rbradley@rejis.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The pumping unit/controller shall be assigned and marked with a unique identification (alphabetic, numeric, or alphanumeric) with a minimum of 2 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The car identification shall be located adjacent to or on every elevator entrance at the designated level, minimum of 3 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1		The car identification shall be painted on, engraved, or securely attached to the car operating panel and shall be a minimum of 1/2 inches in height.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.11 - Disconnecting Means and Control	8.11.2.1.2(k)		Feeder locations for the main branch circuit shall be marked on the disconnect.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an overspeed valve that in not sealed. A category 5 test shall be performed on the overspeed valve on or before the next annual inspection. The valve shall be sealed and tagged after the category 5 test.	8/30/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	8.11.2.1.1(q)	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	8/15/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		The displayed certificate is expired. A current MO State operating certificate shall be obtained and displayed in the machine room.	9/18/2023

Back