Inspection

Inspection Details

Equipment ID
13668

Inspection Date
7/13/2026

Inspection Type
Annual Inspection

Inspector Name
Sean Carmody

Mechanic Name
Dustin Arnett

Relief Valve Pressure
NA

Slide
NA

Governor Rope Pull
NA

Door Closing Force
21

External ID
00b8acd6-6d4d-424f-b140-4829d02b0853

Location

Kiener West Garage
604 Pine St, St. Louis, MO
Phone: (314) 241-4262

Owner

Attn: Inter Park Holdings LLC
Inter Park Holdings LLC
100 S 9th St, St. Louis, MO 63102
Phone: (000) 000-0000
Email: bill.vansambeek@intpark.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	Yes	No	Door close operation shall require constant pressure on phase 2 fire service.	10/2/2018
conversion	conversion	conversion - reinspect	Yes	No	Car shall return to phase 1 when turning phase 2 switch to off.	10/2/2018
conversion	conversion	n/a	No	No	In car position indicator shall work.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	Yes	Yes	A category 5 inspection is required.	2/18/2020
MO Minimum : Elevators	(S) - Fire Service	(S)1	Yes	No	Phase 1 and Phase 2 key switches shall be keyed the same.	2/18/2020
MO Minimum : Elevators	(F) - Electrical Switches	(F)3	Yes	No	Car operating panel is damaged and shall be repaired or replaced as needed.	2/18/2020
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	No	No	Post the current state operating certificate in the elevator machine room.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods	No	No	The fan located in the elevator cab shall be guarded.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	Yes	No	Hoistway door closers shall operate properly.	2/18/2020
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)	No	No	The pit lighting shall be operational.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	Yes	Yes	A category 5 full load test is due. Unit will be modernized in March/April. Deputy Chief Gus Guadamuz approved delay in Category 5 test until MOD.	2/18/2020
MO Minimum : Elevators	(S) - Fire Service	(S)1	Yes	Yes	Phase 1 fire service shall be operational. - Unit Red Tagged	2/18/2020
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	No	No	Post the current state operating certificate in the elevator machine room.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods	No	No	The fan located in the elevator cab shall be guarded.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	Yes	No	Hoistway door closers shall operate properly.	7/27/2020
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)	No	No	The pit lighting shall be operational.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	Yes	Yes	A category 5 full load test is due. Unit will be modernized in March/April. Deputy Chief Gus Guadamuz approved delay in Category 5 test until MOD.	7/27/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	Yes	No	Machine room wiring shall be enclosed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	Yes	No	All wireway and electrical device covers must be installed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	Yes	No	Temporary wiring must be removed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	Yes	No	The receptacles in the machine room shall be of the GFCI type.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.5 - Housekeeping	8.11.2.1.2(e) (Re-Inspection)	Yes	No	Equipment in the machine room not being used in conjunction with the function or use of the elevators shall be removed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	2.4.2	Yes	No	2.4.5 - A data plate complying with 2.16.3.3 permanently and securely attached shall be provided in the pit, in the vicinity of the counterweight buffer, indicating the maximum designed counterweight runby.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1	Yes	No	The machines, controller, governor, isolation transformers, and disconnects shall have an identification number or letter painted or engraved, or securely attached, corresponding to the elevator they serve, and shall be a minimum of 2" in height.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	2.18.5	Yes	No	The governor rope shall have tags installed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.23 - Suspension rope	2.20	Yes	No	The suspension ropes shall have tags installed.	9/30/2020
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	Governors need to be spun and pullout/pull thru test must be performed.	7/11/2025

Back