Inspection

Inspection Details

Equipment ID
13060

Inspection Date
7/25/2026

Inspection Type
Reinspection

Inspector Name
Chad Hackstadt

Mechanic Name
Jeremy Krawzik

Relief Valve Pressure
NA

Slide
NA

Governor Rope Pull
NA

Door Closing Force
NA

External ID
05fd2125-67cc-447f-90f8-2a15ddbb6741

Location

Citi Mortgage
1000 Technology Dr, St. Charles, MO
Phone: (636) 261-0323

Owner

Attn: Keith Gaylord
Citi Mortgage
1000 Technology Dr, O'Fallon, MO 63368
Phone: (636) 261-3819
Alt Phone: (636) 485-7857
Email: keith.gaylord@citi.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
A17.1-1996 : Elevators	1.6 - Car emergency signal	1001.2(a)(6) (Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	Yes	No	The in car emergency telephone shall be operational with 24/7 support.	6/17/2020
A17.1-1996 : Elevators	2.41 - Maintenance Records	8.6.1.4	No	No	Provide a code compliant MCP including onsite documents.	8/10/2021
A17.1-1996 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing	No	No	This elevator is equipped with an over speed valve that in not sealed. A category 5 test shall be performed on the over speed valve on or before the next annual inspection. The valve shall be sealed and tagged after the category 5 test.	8/10/2021
A17.1-1996 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing (Re-Inspection)	Yes	No	This elevator is equipped with an over speed valve that in not sealed. A category 5 test shall be performed on the over speed valve. The valve shall be sealed and tagged after the category 5 test.	6/22/2022
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	2/15/2025
A17.1-1996 : Elevators	1.17 - Standby power operation	1002.2g (Standby Power Operation)	Yes	No	Emergency power tested and failed. When elevator switched from normal power to emergency power the overload switch in the machin room controller tripped. This did not allow elevator to frun on emergency power until switch was reset. Repair as needed.	7/25/2026

Back