Inspection

Inspection Details

Equipment ID
27049

Inspection Date
8/24/2026

Inspection Type
Annual Inspection

Inspector Name
Robert Kehm

Mechanic Name
Thomas Waters

Relief Valve Pressure
438

Slide
NA

Governor Rope Pull
NA

Door Closing Force
17

External ID
e809b7d9-c86a-4fc6-b5d4-f58d0e29079a

Location

Hardin Middle School
1960 Elm St, St. Charles, MO
Phone: (636) 443-4000
Email: whitney.davis@tkelevator.com

Owner

Attn: City of St Charles School District
City of St Charles School District
400 N 6th St, St. Charles, MO 63301
Phone: (636) 443-4000
Email: scsdfac@stcharlessd.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
A17.1-2016 : Elevators	1.4 - Sills and car floor	2.5.1.4	Yes	No	Install and verify cab floor covering.	8/14/2025
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.10 Acceptance Inspection and Test	Yes	No	Verify ride/leveling quality.	8/14/2025
A17.1-2016 : Elevators	2.3 - Lighting and receptacles	2.7.9.1	Yes	No	Machine space (2nd landing) lighting shall be atleast 19 fc.	8/14/2025
A17.1-2016 : Elevators	2.16 - Overhead Beam and Fastenings	2.9.1	Yes	No	Top of hoistway hoisting beam needs capacity labeled.	8/14/2025
A17.1-2016 : Elevators	3.10 - Hoistway construction	3.1	Yes	No	Fire caulk/fill holes and voids in hoistway walls.	8/14/2025
A17.1-2016 : Elevators	3.12 - Pipes, wiring, and ducts	3.8	Yes	No	Top of hoistway light switch box is missing hole/knockout cover.	8/14/2025
A17.1-2016 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.5	Yes	No	Pit lighting shall be at least 10fc.	8/14/2025
A17.1-2016 : Elevators	3.12 - Pipes, wiring, and ducts	3.8	Yes	No	Pit sump pump "Oil Tector" shall be relocated outside of pit area.	8/14/2025
A17.1-2016 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	3.27	Yes	Yes	Top of hoistway smoke detector shall be within 12" of ceiling.	8/14/2025
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	Need to test top and bottom overtravel measurements, 3D edge, remainder of pit equipment and clearances.	8/14/2025

Back