Inspection

Inspection Details

Equipment ID
7091

Inspection Date
2/16/2018

Inspection Type
Annual Inspection

Inspector Name
Angelo Consiglio

Mechanic Name

Relief Valve Pressure
320 psi

Slide

Governor Rope Pull

Door Closing Force
25 lbs

External ID

Location

Lou Fusz Nissan
925 N Lindbergh Blvd, Creve Coeur, MO
Phone: (314) 997-3400

Owner

Lou Fusz Automobile
925 N Lindbergh Blvd, Creve Coeur, MO 63141

Billing

Attn: Lou Fusz Automobile

925 N Lindbergh Blvd, , MO 63141

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	x	Slow down on fire recall from hall key sw. inoperative, repair	4/16/2018
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.5 Fire Extinguishers		Fire extinguisher in machine rom is expired. Replace or have serviced
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of current state operating certificate needs to be properly displayed in machine room
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		Lighting in machine room shall be at least 10 foot candles at floor in front of controller. Repair light fixtures to provide efficient lighting
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		All non elevator related wiring in machine room shall be enclosed in conduit/ ductwork, walled off or removed
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.5 Fire Extinguishers		Fire extinguisher in machine room is expired, replace or have serviced
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A copy of the current operating certificate shall be displayed in the machine room
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		Lighting in machine room shall be at least 10 foot candles st floor in front of controller, repair light fixture to provide sufficient lighting
MO Minimum : Elevators	(H) - Machine Rooms	(H)4		All non elevator related wiring in machine room shall be enclosed in conduit / ductwork, walled off or removed

Back