Inspection

Inspection Details

Equipment ID
13808

Inspection Date
5/20/2019

Inspection Type
Annual Inspection

Inspector Name
Michial Linenfelser

Mechanic Name
Scott Tiemann

Relief Valve Pressure
460

Slide

Governor Rope Pull

Door Closing Force
26

External ID
f33db2ac-0537-41c1-b758-85a402340f9c

Location

900 Hornet Bldg
900 HORNET DR, HAZELWOOD, MO

Owner

Attn: Toby Clodfelter
Special School District of Saint Louis County
12110 Clayton Road, Saint Louis, MO 63131
Phone: (314) 989-8100

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		The elevator machine room door shall be self-closing and self-locking and shall be operable from the interior space without the use of a key.	6/12/2019
MO Minimum : Elevators	(H) - Machine Rooms	(H)4		The elevator machine room cannot be used for storage. Remove the items being stored in the machine room to provide proper room for maintenance to be performed.	6/12/2019
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.15 Car Emg Sys (Phone or alarm not functioning Mandatory Re-Inspection due in 14 days)	x	The elevator ADA telephone inside the elevator is not working properly. Check and repair the programming of this phone for proper operation and passenger safety.	11/6/2019
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	The testing has not been completed on the elevator at this time. Testing was suspended after Elevator #1 was red tagged. Only the elevator hoistway and pit were inspected. Reinspection required.	1/30/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13.1(l) Means to restrict hoistway/car door opening (Door Restrictors) (Re-Inspection)	x	Repair inoperable door restrictor.	3/8/2021
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		Install crosshead data tag.	4/6/2023
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		The machine room lighting has been changed to a motion type switch to activate. While this is an energy saving measure, it also is a safety code concern. Without motion the switch deactivates the lighting, thereby leaving maintenance personnel with no lighting. Remove motion type switch to a conventional on/off switch	4/6/2023
A17.1-2016 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	8.6.4.19.6	x	In car stop switch is not overridden when car is in flight on phase I fire recall, needs repaired. Re-inspection required	6/20/2024

Back