Inspection

Inspection Details

Equipment ID
8377

Inspection Date
5/1/2019

Inspection Type
5 Year Annual Inspection

Inspector Name
Gary Beadle

Mechanic Name
Phillip Moise, Jr.

Relief Valve Pressure
420

Slide

Governor Rope Pull

Door Closing Force
22

External ID
526d6d52-ec3a-4588-8243-39aa389a0d07

Location

Plaza One Office Bldg
502 EARTH CITY PLZ # 504, EARTH CITY, MO

Owner

Attn: UNK
Pintail LLc
P O Box 179173, St Louis, MO 63117
Phone: (314) 865-9173

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Display current state operating certificate.	6/12/2019
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.1.6.3 Controllers ,Wiring and Wiring Diagrams		A legible copy of the schematics shall be kept in the machine room.	7/22/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4 Maintenance records		A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	5/11/2021
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Up to date operating certificate required in the machine room.	8/2/2023
MO Minimum : Elevators	(H) - Machine Rooms	(H)9	x	Each elevator having polyphase alternating current power supply shall be provided with means to prevent the starting of the elevator motor if: (A) the phase rotation is in the wrong direction; or (B) there is a failure of any phase.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	x	A Roust-a-bout fitting located below the hydraulic tank is leaking and shall be replaced with an approved grooved or threaded fitting (Roust-a-bout fittings are no longer allowed on elevators).
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	The plunger gripper is due to be tested with a full load this year.
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4 (Re-Inspection)	x	The pump motor belts shall not slip under load.

Back