Inspection

Inspection Details

Equipment ID
21239

Inspection Date
8/12/2019

Inspection Type
Annual Inspection

Inspector Name
Clyde Johnson

Mechanic Name
Robert Kehm

Relief Valve Pressure

Slide

Governor Rope Pull

Door Closing Force

External ID
4680ec51-a17d-466b-9452-69c5e096246d

Location

Dierberg's
1080 LINDEMANN RD, SAINT LOUIS, MO
Phone: (636) 532-8884

Owner

Attn: Robin Vogt
Dierberg General Office
16690 SWINGLEY RIDGE RD, CHESTERFIELD, MO 63017
Phone: (000) 000-0000
Email: vogtr@dierbergs.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		A comb plate has a broken tooth and shall be replaced.	10/11/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.17 - Step/skirt clearances, panels, and performance index	8.6.8.5 Escalator Skirt Panels		Test not complete - no indexing	10/11/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.9 - Steps and upthrust device	8.6.8.6	x	Replace three broken step treads.	9/23/2021
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	8.2 - Stop switch	8.11.4.2.2	x	Replace cover on upper landing stop switch.	9/23/2021
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.3 - Handrails	6.1.3.4 (Hand rails) (Re-Inspection)		Handrails cracking. Shall be replaced	3/9/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.17 - Step/skirt clearances, panels, and performance index	8.6.8.3 Step/Skirt Performance Index	x	Step indexing incomplete. Shall finish step indexing test and brake torque test	12/1/2021
A17.1-1996 : Escalators	7.10 - Operating and safety devices	805.3a		Escalator shall have a clear plastic cover over emergency stop switches with an audible alarm which is activated by lifting the cover
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.10 - Operating and safety devices	6.1.6.3.1 Emergency Stop Buttons (Re-Inspection)	x	Escalators shall have a clear plastic cover over emergency stop switches with an audible alarm which is activated by lifting the cover. Re-inspection required	12/7/2023

Back