Inspection

Inspection Details

Equipment ID
8649

Inspection Date
9/16/2019

Inspection Type
Annual Inspection

Inspector Name
Paul Karrenbrock

Mechanic Name
Robert Kehm

Relief Valve Pressure

Slide
Na

Governor Rope Pull
NA

Door Closing Force
19

External ID
2ae066ca-e56d-4cc1-b2c3-e4d8e0752fb2

Location

Clayton Corporate Park Management Company
600 CORPORATE PARK DR, CLAYTON, MO

Owner

Clayton Corp Park Management Company
700 CORPORATE PARK DR, CLAYTON, MO 63105-4209

Billing

Attn: Clayton Corporate Park Management Co.

600 CORPORATE PARK DR, CLAYTON, MO 63105-4204

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4.1(a) On-Site Maintenance Records (MCP Records)		Written maintenance control program shall be kept on site for each elevator.	12/18/2020
MO Minimum : Elevators	(K) - Car Platforms and Car Slings	(K)6	x	Replace damaged bottom car roller. Re-inspection required	9/25/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.5 Code Data Plate		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to (A17.1 1993), as used for all inspections. Provide a proper plate on the front of the controller or mainline disconnect.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1- 8.6.4.15 Car Emergency Systems (Emergency Light) (Re-Inspection)	x	The emergency car lighting is not operational.The fixture shall be repaired to operate. Reinspection required.	9/10/2024
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	This elevator has a backup emergency generator power that is used in case of a power outage. This system shall be scheduled to be tested and a reinspection is required. This requirement is due to the State of Missouri adopting the A17.1 2016 version of the elevator safety code. Reinspection required.	9/10/2024
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.5 Code Data Plate		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to (A!&.1 1993), as used for all inspections. Provide a proper plate on the front of the controller or mainline disconnect.
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	The elevator has a backup emergency generator power that is used in case of a power outage. This system shall be scheduled to be tested and a re-inspection is required. This requirement is due to the state of Missouri adopting the A17.1 2016 version of the elevator safety code. Re-inspection required

Back