Inspection

Inspection Details

Equipment ID
20709

Inspection Date
12/18/2019

Inspection Type
Reinspection

Inspector Name
Derek Rankin

Mechanic Name
Matthew Fernandez

Relief Valve Pressure

Slide

Governor Rope Pull

Door Closing Force

External ID
3f3df7c7-650e-4564-adc1-ab66c96c7d42

Location

Stifel Theatre
1400 MARKET ST, SAINT LOUIS, MO
Phone: (314) 499-7701

Owner

Attn: Adrian Silverstein
Scottrade Center
1401 CLARK AVE, SAINT LOUIS, MO 63103
Phone: (314) 499-7701

Billing

Attn: Scottrade Center
Stifel Theatre
1401 CLARK AVE, SAINT LOUIS, MO 63103
Phone: (314) 499-7701

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.9 - Steps and upthrust device	8.11.4.2.9	x	Replace broken step treads.	10/1/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.9 - Steps and upthrust device	8.6.8.6	x	There are three treads that have broken teeth. Reinspect within 90 days.	12/18/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	8.1 - Machinery space access, lighting, receptacle, and condition	8.6.8.14		Upper and lower machine spaces are dirty and need cleaned.	11/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	8.12 - Steps, step chains, and trusses	8.11.4.2.12		Entire truss needs to be cleaned out.	9/3/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.5 - Lighting	6.1.6.7		Lower demarcation lights don't work.	11/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.10 - Operating and safety devices	6.1.6.3.1 Emergency Stop Buttons (Re-Inspection)	x	Upper level emergency stop switch cover does not have a buzzer when opened.	12/18/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.6 - Caution Signs	6.1.6.9		There needs to be caution signs posted on top and bottom landings of the escalator.	11/4/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.7 - Combplate and comb step impact device	8.6.8.4 Combplates	x	A center combplate on upper end has a broken tooth, replace same	9/13/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Down combplate impact center and left settings exceed maximum allowable by code, adjust, repair & re-test. Re-inspection required	9/13/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Need to perform required brake torque testing. Re-inspection required	9/13/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Need to perform missing step testing. Re-inspection required	9/13/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.7 - Combplate and comb step impact device	8.6.8.4 Combplates	x	Upper end has comb plate, broken tooth.	12/1/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Provide brake torque test.	12/1/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Provide missing step test.	12/1/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.10 - Operating and safety devices	6.1.6.3.1 Emergency Stop Buttons (Re-Inspection)	x	Transparent cover missing from lower landing emergency stop switch. Install transparent cover. Re-inspection required	2/24/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.5 - Lighting	8.6.11.5(i) Demarcation Lighting (Re-Inspect)	x	Lower landing demarcation lights do not work, need repaired. Re-inspection required	2/24/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Escalators	7.17 - Step/skirt clearances, panels, and performance index	8.6.8.3 Step/Skirt Performance Index	x	Perform step indexing test. Re-inspection required	2/24/2025

Back