Inspection

Inspection Details

Equipment ID
10683

Inspection Date
12/19/2019

Inspection Type
Annual Inspection

Inspector Name
Clyde Johnson

Mechanic Name
Timothy Cook

Relief Valve Pressure
500

Slide

Governor Rope Pull

Door Closing Force
25

External ID
9ba3bc49-a816-406b-a0a5-7927a0e814ec

Location

Barnes-Jewish Extended Care
401 CORPORATE PARK DR, CLAYTON, MO
Phone: (314) 273-0165

Owner

Barnes Jewish Extended Care
401 CORPORATE PARK DR, CLAYTON, MO 63105-4201

Billing

Attn: Barnes Jewish Extended Care

401 CORPORATE PARK DR, CLAYTON, MO 63105-4201

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		There are pipes that carry liquids, gases or vapors directly above the elevator controller. These pipes should be guttered to assure that no discharge from these pipes falls onto the elevator equipment.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		A17.1-1987 102.2 A sprinkler head has been added to the elevator machine room without the required heat detector to activate the shunt trip disconnect before the application of water. Heat detectors shall be installed within 2’ of each sprinkler head to activate the shunt trip disconnect.
MO Minimum : Elevators	(S) - Fire Service	211.3a(8) Visual and audible signal		The fireman's emergency service phase I and II operations was tested and the following deficiency was noted: The audible signal device did not sound when phase I was activated.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13.1(l) Means to restrict hoistway/car door opening (Door Restrictors) (Re-Inspection)	x	The rear car door restrictor device is located in the machine room and shall be installed so that it will properly catch and restrict opening of the car doors to a maximum of 4 inches when the car is away from the landing zone. Reinspection is required.	4/3/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods		On top of the elevator car, the cab steadier bushings shall be reinstalled to provide proper car clearance and more stable car.

Back