Inspection

Inspection Details

Equipment ID
11152

Inspection Date
12/12/2019

Inspection Type
Annual Inspection

Inspector Name
Edward Balsat

Mechanic Name
David Howerton

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
26

External ID
538378f7-8c79-42fa-b7cb-693eead9f09a

Location

Station Plaza Limited Partnership
1900 PINE ST, SAINT LOUIS, MO
Phone: (000) 000-0000

Owner

Station Plaza Limited Partnership
233 PARK AVE STE 201, MINNEAPOLIS, MN 55415-1132

Billing

Attn: Station Plaza Limited Partnershiphield

3630 GRANDEL SQ, SAINT LOUIS, MO 63108-3626

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
MO Minimum : Elevators	(I) - Pits	(I)5			A code compliant ladder shall be installed in the elevator pit.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.7 - Fire Extinguisher	8.6.1.6.5			A current tested fire extinguisher is required in the elevator machine room.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate			Display a current state operating certificate.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.8 - Car safeties and guiding members - including roped-hydraulic elevators installed under A17.1b-1989 and later editions	8.11.3.1.5 (j) Car Safety	x		A category 5 safety test shall be performed.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4			Provide a written MCP.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.5 - Housekeeping	8.11.2.1.2(e) (Re-Inspection)			The machine room shall not be used for the storage of non-elevator related material.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.2 - Car top light and outlet	8.11.2.1.3(b)			The car top light shall be operational.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits			The pit shall be kept clean.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	8.11.2.1.1(f) (Insp code) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x		The emergency alarm bell shall be operational.	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	2.27.2-2.27.8	x	x	Phase 2 fire service shall be operational. (Maintenance company attempted to fix, but unable to. Unit due for MOD in May 2020).	12/9/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.8 - Door closing force	8.11.2.1.1(h)	x		The door closing force shall be under 30 lbs.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.5 Illumination of Pits	x		Provide code compliant pit lighting at all areas of the pit. The pit lighting shall be a minimum of 10 ftc.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits	x		Properly fix the hole in the pit wall near piping.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4	x		An MCP shall be kept on-site.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	2.27.3.1.6(h) Phase 2 Audible/Visual Signal (Re-Inspection)	x		The flashing hat feature on fire service shall be operational when the smoke detectors in the hoistway and machine room are activated.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.22 - Wire rope fastening and hitch plate	8.11.2.1.3(bb)	x		The hoist ropes shall be properly secured in the shackles.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	4.1 - Car platform guard	2.15.9	x		The toe guard shall be 48" long. If pit depth in inadequate to support a 48" toe guard a variance shall be applied for.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.4 Access to Pit	x		The pit ladder shall be code compliant. If a code compliant pit ladder will not fit in the pit a variance shall be applied for.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	4.2 - Hoistway doors	8.11.2.1.4(b)	x		The gaps between the hoistway door panels and frames shall not exceed 3/8". If code compliant gaps cannot be achieved, a variance shall be applied for.	12/16/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4			A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room.	1/26/2022

Back