Inspection

Inspection Details

Equipment ID
7127

Inspection Date
12/17/2019

Inspection Type
Annual Inspection

Inspector Name
Michael Ledden

Mechanic Name
Don McFadden, Jr.

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
19

External ID
db6f4433-a6e6-4fc6-a2f7-cfdf48c258eb

Location

Gallery 515
515 OLIVE ST, SAINT LOUIS, MO
Phone: (314) 241-5964

Owner

Attn: Brandonview LLC
Brandonview LLC
515 OLIVE ST STE 106, SAINT LOUIS, MO 63101
Phone: (314) 421-4500
Email: gallery515@stlluxury.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.7 - Fire Extinguisher	8.11.2.1.2(g)		Provide a current tested fire extinguisher in the elevator machine room.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Post current state operating certificate.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	8.11.2.1.2(c)		Provide code compliant lighting (19ftc) throughout the whole machine room.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	8.11.2.1.2(c)		Machine room lighting shall be guarded to prevent accidental breakage or contact.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.4 - Machine space	8.11.2.1.2(d)		Seal penetration in the machine room where old fan was located and penetrations around the current fan.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.6 - Ventilation	8.11.2.1.2(f)		Provide a guard on the ventilation fan to prevent accidental contact.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	8.11.2.1.2(c)		Provide cover on electric utility junction box next to the fan.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.4 - Machine space	8.11.2.1.2(d)		Wooden structure supporting wall fan not fire rated.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits		Pit access door shall be self-closing and self-locking.	4/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits		Provide code compliant lighting (10ftc) throughout the pit.	4/4/2019
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.5 Fire Extinguishers		An ABC fire extinguisher with a current test tag shall be mounted in the machine room located convenient to the access door.	3/15/2022
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.4 - Sills and car floor	8.11.2.1.1(d)		Illumination at Landing Sills: The building corridors shall be so lighted that the illumination at the landing sills, when an elevator is in service, shall be not less than 10 fc. Note: Some lobbies are under construction, and not lighted.	3/15/2022
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		The buffers, pit channels, and/or the compensating sheave assembly, which are visible from the pit access door, shall be marked with the car identification number with a minimum of 2 inches in height and of a contrasting color to its background.	3/15/2022
MO Minimum : Elevators	(A) - Hoistways	(A)13		Hoistways containing passenger elevators shall be fully enclosed and the enclosure shall be of solid construction. The large hole in the hoistway wall near the bottom landing shall be sealed using approved material.	3/15/2022
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4 Maintenance records		A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	3/15/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.9 - Floor and emergency identification numbering	2.29.1		The identification number for each elevator shall be painted on, engraved, or securely attached adjacent to or on every elevator entrance at the designated level, and shall be a minimum of 3 inches in height.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.10 - Hoistway construction	2.1		Hoistways containing passenger elevators shall be fully enclosed and the enclosure shall be of solid construction. The large hole in the hoistway wall near the bottom landing shall be sealed using approved material.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	2.7.5.1 Lighting		Permanent electric lighting shall be provided in all machine rooms and machinery spaces. The illumination shall be not less than 19 foot-candles at the floor level. Note: The secondary space is not lighted.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.1 - Access to machine space	2.7.3.4		Access doors to machine rooms and overhead machinery spaces shall be self-closing and self-locking and shall be operable from the interior space without the use of a key. Note: The secondary access door doesn't meet these requirements.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	8.6.4.2	x	Governor rope has multiple breaks throughout and is undersized. It shall be replaced.

Back