Inspection

Inspection Details

Equipment ID
18280

Inspection Date
4/21/2020

Inspection Type
Annual Inspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name
Bryan Hesskamp

Relief Valve Pressure
180/360

Slide

Governor Rope Pull

Door Closing Force
None

External ID
ac03f64d-c7cb-4183-b260-1236c82ac2a0

Location

Union Market- J.F. San Filippo
705 N BROADWAY & LUCAS, ST. LOUIS, MO
Phone: (314) 231-8100

Owner

Citipark
707 N 2ND ST, SAINT LOUIS, MO 63102-2545

Billing

Attn: Citipark

707 N BROADWAY, SAINT LOUIS, MO 63102-2106

Violations

Code	Item	Section	Reason For Violation
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.
MO Minimum : Elevators	(H) - Machine Rooms	(H)2	The machine room door shall be self-closing, self-locking and shall be operable from the interior space without the use of a key.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.5 Fire Extinguishers	An ABC fire extinguisher with a current test tag shall be mounted in the machine room located convenient to the access door.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4 Maintenance records	All the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room.
MO Minimum : Elevators	(A) - Hoistways	(A)16	The unsupported raceway in the hoistway (pit) shall be properly installed and supported.
MO Minimum : Elevators	(H) - Machine Rooms	(H)8	All machine room wiring shall be enclosed. (Note: The box cover shall be installed where the machine room lights plug in).
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods	8.6.5.8 - Based on the installation date of 1961, the hydraulic cylinder is assumed to be of the single bottom type. If proof of a safety bulkhead cannot be verified, then the installation shall be altered to meet the requirements of A17.1 2016 - Sections 8.6.5.8, 8.6.3.10, 8.7.3.23.1, and 3.18.3.4
MO Minimum : Elevators	(H) - Machine Rooms	(H)4	The machine room shall be kept clean.
MO Minimum : Elevators	(A) - Hoistways	(A)16	The traveling cables shall be installed using an approved method. (Note: the cable was installed without a hanger on the car end and has moved, exposing the wires).

Back