Inspection

Inspection Details

Equipment ID
2800

Inspection Date
5/15/2020

Inspection Type
5 Year Annual Inspection

Inspector Name
Michial Linenfelser

Mechanic Name
Bradley Tramel

Relief Valve Pressure

Slide
Incomplete

Governor Rope Pull
390/925

Door Closing Force
25

External ID
4c119ab4-e9f9-4d2b-9f0c-840a3d88bd25

Location

South Bemiston Association
230 S BEMISTON AVE, CLAYTON, MO
Phone: (314) 726-1444

Owner

Attn: The Michelson Organization
The Michelson Organization
7701 Forsyth Blvd, Ste 900, Clayton, MO 63105
Phone: (314) 862-7080
Fax: (314) 862-4725
Email: littonr@michelsonrealty.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)8	x	x	Upon performing the required five year full load, the elevator safety governor was found to be worn to a degree that the mechanical and electrical protection devices would not activate within the required limits. Repair or replacement of the governor is required and a reinspection shall be performed before the elevator can be returned to service.	6/29/2020
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		The testing has not been completed on the elevator at this time. The weight test shall be performed, safeties set, and buffers compressed before the inspection is completed.	6/29/2020
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		The the category 5 testing has not been completed on the elevator at this time. The weight test shall be performed, safeties set, and buffers compressed before the inspection is completed.	6/29/2020
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)12 (Re- Inspection)	x		Repair the ends of the counterweight side of two ropes. Ropes need to be seized or banded to prevent unraveling.	7/8/2021
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)12 (Re- Inspection)	x		Elevator has a hoist rope that is slipping across the sheave, the rope is worn. The driver sheave is worn from the rope slippage, repair or replacement of rope and sheave is recommended. Re-inspection required
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts			Car top door operator cambox has broken flex, repair or replace flex

Back