Inspection

Inspection Details

Equipment ID
20331

Inspection Date
6/3/2020

Inspection Type
Annual Inspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name
Jeff Setchfield

Relief Valve Pressure
610

Slide

Governor Rope Pull

Door Closing Force
18

External ID
9b78abc1-865e-4b01-a2a6-423e2bf66647

Location

St. Louis ARC Inc
1177 N WARSON RD, SAINT LOUIS, MO
Phone: (314) 817-2261

Owner

Attn: St. Louis ARC Inc
St. Louis ARC Inc
1177 N WARSON RD, SAINT LOUIS, MO 63132
Phone: (000) 000-0000
Email: lwagner@slarc.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4		A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	1/27/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an over speed valve that in not sealed. A category 5 test shall be performed on the over speed valve in 2021 or 2022. The valve shall be sealed and tagged after the category 5 test.	1/27/2023
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	2/27/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	3.26.10 (Auxiliary Power)(Re-Inspection)	x	The auxiliary power lowering operation shall be functional.	6/18/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.11 - Disconnecting Means and Control	2.26.4	x	Where an additional power source is connected to the load side of the disconnecting means, the disconnecting means required in Section 620-51 shall be provided with an auxiliary contact that is positively opened mechanically and the opening shall not be solely dependent on springs. This contact shall cause the additional power source to be disconnected from its load when the disconnecting means is in the open position. Note: This function is currently provided by a relay, which isn't allowed, and will not allow the ERU to operate if the power fails because the relay coil is being powered on. When grid power is lost, this relay will de-energize and open it's contact. The contact has to be closed to allow the ERU to operate. The contact is required to be mechanically operated by the main line disconnect, not by the presence or absence of power.	6/18/2024

Back