Inspection

Inspection Details

Equipment ID
5423

Inspection Date
7/7/2020

Inspection Type
Reinspection

Inspector Name
Michael Ledden

Mechanic Name
Stephen Lupo

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
NA

External ID
ab157453-a5da-4610-8a97-5cf8adc05b2c

Location

York House on Lindell
4931 LINDELL BLVD, SAINT LOUIS, MO
Phone: (345) 109-0329

Owner

Attn: Koplar Properties
Koplar Properties
50 MARYLAND PLZ STE 300, SAINT LOUIS, MO 63108
Phone: (000) 000-0000

Billing

Attn: Koplar Properties
Koplar Properties
50 MARYLAND PLZ STE 300, SAINT LOUIS, MO 63108
Phone: (000) 000-0000
Email: kelly@koplar.com

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	x		Shorten the hoist ropes.	6/11/2018
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.6 - Final and emergency terminal stopping devices	8.11.2.1.3(h)	x	x	Shorten the hoist ropes to allow proper operation on upper final limit.	6/15/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.17 - Drive machine brake	8.11.2.1.2(o)	x		Test the rope gripper for proper operation with 125% capacity.	6/15/2020
A17.1-2016 : Elevators	1.6 - Car emergency signal	8.11.2.1.1(f) (Insp code) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x		The in car emergency telephone shall be operational.	7/7/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.41 - Maintenance Records	8.6.1.4			A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	4/22/2021
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods			This elevator previously had the ability to operate on standby/emergency power. The generator has now been disconnected but may be re-connected at some point. So long as the elevator does not operate on standby/emergency power, the emergency power fixture at the egress floor for this car shall be removed or covered. If/when the elevators are re-connected to the emergency generator, the emergency power indicator jewel shall be re-installed and standby/emergency power operation of the elevators shall be tested.	4/22/2021
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems			Replace missing gibbs and fire tabs at basement and first floor.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	8.6.4.7 Cleaning of Pits			The pit shall be kept dry. Remove rust from pit equipment, repair/replace as needed, apply rust prevention treatment to all pit still. Investigate/repair water leak.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2.6 Sump Pump Covers			Pit sump cover to be reinstalled, and shall be substantially flush to pit floor.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate			A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.

Back