Inspection

Inspection Details

Equipment ID
8897

Inspection Date
9/22/2020

Inspection Type
Annual Inspection

Inspector Name
Kurt Zimmerman

Mechanic Name
Charles Sheriff

Relief Valve Pressure

Slide
Na

Governor Rope Pull
Na

Door Closing Force
24

External ID
1f5b2728-64a9-4185-8915-8da760ee2b60

Location

Clayton Corporate Park Management Company
500 CORPORATE PARK DR, CLAYTON, MO
Phone: (314) 267-6881

Owner

Clayton Corporate Park Management Company
500 CORPORATE PARK DR, CLAYTON, MO 63105-4202

Billing

Attn: Clayton Corporate Park Management Company

500 CORPORATE PARK DR, CLAYTON, MO 63105-4202

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4.1(a) On-Site Maintenance Records (MCP Records)		Written maintenance control program shall be kept on site for each elevator.	12/18/2020
MO Minimum : Elevators	(S) - Fire Service	8.6.11.1 Monthly Test and Log		Perform monthly fire service and document on log in machine room
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.5 Code Data Plate		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to (A17.1 1993), as used for all inspections. Provide a proper plate on the front of the controller or mainline disconnect.
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	This elevator has a backup emergency generator power that is used in case of a power outage. This system shall be scheduled to be tested and a reinspection is required. This requirement is due to the State of Missouri adopting the A17.1 2016 version of the elevator safety code. Reinspection required.	10/31/2024
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	x	Elevator has emergency power selector switch at main lobby landing. Facilities manager says elevator is not on emergency power. Either provide documentation that elevator is not on emergency power and remove selector switch, or test elevator for operation on emergency power. Re-inspection required
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		There is no code data plate found on the equipment to indicate the code and edition that the elevator was installed to (A17.1 1993) as used for all inspections. Provide a proper plate on the front of the controller or mainline disconnect.

Back