Inspection

Inspection Details

Equipment ID
13668

Inspection Date
9/30/2020

Inspection Type
Reinspection

Inspector Name
Edward Balsat

Mechanic Name
Edward Bauer

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
NA

External ID
93aa47f0-9b99-4cbd-bd4b-00fb2305eb8b

Location

Kiener West Garage
604 PINE ST, SAINT LOUIS, MO
Phone: (314) 241-4262

Owner

Inter Park Holdings LLC
100 S 9TH ST, SAINT LOUIS, MO 63102-1124

Billing

Attn: Inter Park

100 S 9TH ST, SAINT LOUIS, MO 63102-1124

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	x		Door close operation shall require constant pressure on phase 2 fire service.	10/2/2018
conversion	conversion	conversion - reinspect	x		Car shall return to phase 1 when turning phase 2 switch to off.	10/2/2018
conversion	conversion	n/a			In car position indicator shall work.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	x	x	A category 5 inspection is required.	2/18/2020
MO Minimum : Elevators	(S) - Fire Service	(S)1	x		Phase 1 and Phase 2 key switches shall be keyed the same.	2/18/2020
MO Minimum : Elevators	(F) - Electrical Switches	(F)3	x		Car operating panel is damaged and shall be repaired or replaced as needed.	2/18/2020
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate			Post the current state operating certificate in the elevator machine room.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods			The fan located in the elevator cab shall be guarded.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	x		Hoistway door closers shall operate properly.	2/18/2020
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)			The pit lighting shall be operational.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	x	x	A category 5 full load test is due. Unit will be modernized in March/April. Deputy Chief Gus Guadamuz approved delay in Category 5 test until MOD.	2/18/2020
MO Minimum : Elevators	(S) - Fire Service	(S)1	x	x	Phase 1 fire service shall be operational. - Unit Red Tagged	2/18/2020
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate			Post the current state operating certificate in the elevator machine room.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods			The fan located in the elevator cab shall be guarded.	5/5/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	x		Hoistway door closers shall operate properly.	7/27/2020
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)			The pit lighting shall be operational.	5/5/2020
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)1	x	x	A category 5 full load test is due. Unit will be modernized in March/April. Deputy Chief Gus Guadamuz approved delay in Category 5 test until MOD.	7/27/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	x		Machine room wiring shall be enclosed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	x		All wireway and electrical device covers must be installed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	x		Temporary wiring must be removed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1	x		The receptacles in the machine room shall be of the GFCI type.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.5 - Housekeeping	8.11.2.1.2(e) (Re-Inspection)	x		Equipment in the machine room not being used in conjunction with the function or use of the elevators shall be removed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.2 - Bottom clearance, runby, and minimum refuge space	2.4.2	x		2.4.5 - A data plate complying with 2.16.3.3 permanently and securely attached shall be provided in the pit, in the vicinity of the counterweight buffer, indicating the maximum designed counterweight runby.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.10 - Numbering of elevators, machines, and disconnect switches	2.29.1	x		The machines, controller, governor, isolation transformers, and disconnects shall have an identification number or letter painted or engraved, or securely attached, corresponding to the elevator they serve, and shall be a minimum of 2" in height.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	2.18.5	x		The governor rope shall have tags installed.	9/30/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.23 - Suspension rope	2.20	x		The suspension ropes shall have tags installed.	9/30/2020

Back