Inspection

Inspection Details

Equipment ID
14316

Inspection Date
12/15/2020

Inspection Type
Annual Inspection

Inspector Name
Angelo Consiglio

Mechanic Name
John Carpentier, Sr.

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
20

External ID
028ef90c-8c93-42f1-8f2b-bb3b1651c3ff

Location

600 Washington Bldg
600 Washington Ave, St. Louis, MO
Phone: (314) 231-2252

Owner

Attn: UNK
Cushman & Wakefield
600 WASHINGTON AVE STE 560, SAINT LOUIS, MO 63101
Phone: (000) 000-0000

Billing

Attn: UNK
Cushman & Wakefield
600 WASHINGTON AVE STE 560, SAINT LOUIS, MO 63101
Phone: (314) 925-2180
Email: erin.valadijia@cushwake.com

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	x		Unintended motion on inspection.	8/23/2018
conversion	conversion	conversion - reinspect	x		Emergency bell not working on battery	8/23/2018
MO Minimum : Elevators	(M) - Car Safeties and Speed Governors	(M)6	x	x	Upon performing the required five year full load, the elevator safety governor was found to be worn to a degree that the activation would not set with any sort of consistency. Repair or replacement of the governor is required and a reinspection shall be performed before the elevator can be returned to service.	3/20/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		The testing has not been completed on the elevator at this time, the elevator was placed out of service. Only a machine room and hoistway inspection was performed, a full inspection shall be performed before the caregory 5 testing is completed. Reinspection is required.	3/20/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		The testing has not been completed on the elevator at this time. Only a machine room and hoistway inspection was performed, a full inspection shall be performed before the caregory 5 testing is completed. Reinspection	5/20/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		The testing has not been completed on the elevator at this time, Only a machine room and hoistway inspection were performed, a full inspection shall be performed before the Cat 5 testing is completed. Full speed counterweight buffer test was performed. All other remaining Cat 5 and emergency generator testing still needs to be performed to complete inspection. Re-inspection required	6/18/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		Testing is incomplete, the generator testing needs to be completed before the category testing is completed. Re-inspection required

Back