Inspection

Inspection Details

Equipment ID
16969

Inspection Date
1/19/2021

Inspection Type
Annual Inspection

Inspector Name
Curtis Belew

Mechanic Name
Jeffrey Miller

Relief Valve Pressure
450

Slide

Governor Rope Pull

Door Closing Force
25F/27R

External ID
6882fbdc-e104-4f4b-8a26-b60bf9ee2805

Location

Cortex One
4320 FOREST PARK AVE, SAINT LOUIS, MO
Phone: (314) 429-5100

Owner

Attn: Dave Harbaugh
VTR LS 4320 Forest Park LLC
175 MARYVILLE CENTER DR SUITE 115, ST LOUIS, MO 63141
Phone: (314) 392-0400
Email: dave.harbaugh@cushmanwakefield.com

Billing

Attn: VTR LS 4320 Forest Park, LLC c/o cushman & Wakefield
VTR LS 4320 Forest Park, LLC c/o Cushman & Wakefield
575 MARYVILLE CENTRE DR STE 115, SAINT LOUIS, MO 63141
Phone: (314) 392-0400

Violations

Code	Item	Section	Reason For Violation	Fixed Date
A17.1-1996 : Elevators	2.41 - Maintenance Records	8.6.1.4	All the on site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room.	3/16/2022
A17.1-1996 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	A current MO State operating certificate shall be posted in the elevator equipment room, in a noncombustible frame with a clear protective vision plate over it.	3/16/2022
A17.1-1996 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing	This elevator is equipped with an over speed valve that in not sealed. A category 5 test shall be performed on the over speed valve on or before the next annual inspection. The valve shall be sealed and tagged after the category 5 test.	3/16/2022
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods	This unit is not equipped to run on emergency power, but has an emergency power selector switch. The switch shall be removed.	3/16/2022
A17.1-1996 : Elevators	2.8 - Pipes, wiring, and ducts	102.1	The temporary jumper in the controller shall be removed or made permanent if a motor thermal overload has not been provided. This temporary jumper is marked for "pump motor thermal overload". The elevator has a working motor overload in the solid state starter.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	The pump motor belts are cracked and shall be replaced and adjusted so they will not slip under load.
A17.1-1996 : Elevators	3.3 - Top-of-car operating device	210.1d	The machine room inspection switch on the main board is shorted in the up direction and shall be repaired or replaced.
A17.1-1996 : Elevators	6.4 - Firefighters' service (A17.1b-1989 and later editions)	211.7 Firefighter' Service Operating Procedures	Firefighters phase one instructions shall be posted near the phase one key switch in the hallway at the egress floor.

Back