Inspection

Inspection Details

Equipment ID
10906

Inspection Date
3/16/2021

Inspection Type
Annual Inspection

Inspector Name
Angelo Consiglio

Mechanic Name
Bill Suedkamp

Relief Valve Pressure
500

Slide

Governor Rope Pull

Door Closing Force
NA

External ID
684922f3-1588-45ce-be09-21b0f60ef20a

Location

Extra Space Storage
4210 Forest Park Ave, St. Louis, MO
Phone: (314) 502-2561

Owner

Extra Space Development LLC
2795 E COTTONWOOD PKWY STE 400, SALT LAKE CITY, UT 84121-7033

Billing

Attn: Extra Space Development LLC

2795 E COTTONWOOD PKWY STE 400, SALT LAKE CITY, UT 84121-7033

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.5 - Housekeeping	8.6.4.8 Machine Rooms and Machinery Spaces		Remove materials from machine room that do not involve elevator operation.	4/27/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	8.6.4.7 Cleaning of Pits		Clean pit.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1		Provide feeder location on main line disconnect.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1		Provide feeder location on the 110v. disconnect. Also other disconnects next to it.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.11 - Plunger and Cylinder	3.18		Remove scavenger unit from pit.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.11 - Plunger and Cylinder	3.18		Remove scavenger line from tank.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.11 - Plunger and Cylinder	3.18		Provide pit bucket.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.5.5.2 Oil Leakage Collection		There is a oil recovery unit installed in the pit of this elevator designed to return the oil leakage from the packing gland on the cylinder head. The State of Missouri has determined that this device does not suffice for oil leakage and is only allowed for temporary use until the packing gland can be repaired/replaced. Remove the recovery unit after the packing gland has been repaired/replaced and record the oil loss per A17.1 2016 - 8.6.5.5.7
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing (Re-Inspect)	x	This elevator has an overspeed valve device installed that is not sealed and is now required to have a 5 year full load test performed. This requirement is due to the State of Missouri adopting the A17.1 2016 version of the elevator safety code. Overspeed valve shall be tested on or before the next annual inspection.	3/18/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.8 - Pipes, wiring, and ducts	2.8.1		Provide feeder location on main line disconnect. The main disconnect shall have directions to the location of where the main line power supply is for emergency purposes.
A17.1-2016 : Elevators	5.15.2 Unsealed Overspeed Valve	8.6.5.16.5 (Re-Inspect)	x	Over speed valve is not sealed and shall be tested within 14 days. This test shall be done every 5 years from the original testing date.	4/3/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing	x	OSV testing required.

Back