Inspection

Inspection Details

Equipment ID
20796

Inspection Date
8/30/2021

Inspection Type
5 Year Annual Inspection

Inspector Name
Robert Kehm

Mechanic Name
Jeffrey Miller

Relief Valve Pressure
465

Slide

Governor Rope Pull

Door Closing Force
19

External ID
b8130cbc-bae2-4d3c-a55a-cb2ff1344d01

Location

Aberdeen Heights-Bldg C # 3
575 COUCH AVE, KIRKWOOD, MO
Phone: (314) 835-0938

Owner

Attn: Ashfield Active Living
Ashfield Active Living
PO BOX 20440, WICHITA, KS 67208
Phone: (000) 000-0000
Email: kkelly@pmma.org

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	2.7.5.1		Machine room light switch shall be a mechanical switch.	8/10/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	3.26.10 (Auxiliary Power)(Re-Inspection)	x	The auxiliary power lowering operation shall be functional. An uninterruptible power supply for the emergency lowering operation was sitting on the floor of the machine room. When an elevator is equipped with this device, it has to be operational and can't be removed without the permission of the MO AHJ.	7/22/2024
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.17 - Standby power operation	3.26.10 (Auxiliary Power)(Re-Inspection)	x	The following violation cited in 2023 has not been corrected: The auxiliary power lowering operation shall be functional. An uninterruptible power supply for the emergency lowering operation was sitting on the floor of the machine room. When an elevator is equipped with this device, it has to be operational and can't be removed without the permission of the MO AHJ. Note: This has auxiliary power unit has not yet been re-installed. See MO Memorandum 016 for more information regarding this violation.	1/10/2025
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.11 - Disconnecting Means and Control	2.26.4	x	Where an additional power source is connected to the load side of the disconnecting means, the disconnecting means required in Section 620-51 shall be provided with an auxiliary contact that is positively opened mechanically and the opening shall not be solely dependent on springs. This contact shall cause the additional power source to be disconnected from its load when the disconnecting means is in the open position.

Back