Inspection

Inspection Details

Equipment ID
20940

Inspection Date
9/21/2021

Inspection Type
Annual Inspection

Inspector Name
Clyde Johnson

Mechanic Name
James DeBell

Relief Valve Pressure

Slide
NA

Governor Rope Pull
NA

Door Closing Force
12

External ID
8ae4e9a0-e15b-48e9-b550-d9219cda6540

Location

Metropolitan Artists Lofts
500 N Grand Blvd, St. Louis, MO
Phone: (314) 713-5278

Owner

Attn: Shannon Smith
Metropolitan Artists Lofts
500 N Grand Blvd, St. Louis, MO 63103
Phone: (314) 713-5278
Email: shannon.smith@dominiuminc.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		Emergency lights shall work	12/9/2019
A17.1-2016 : Elevators	3.23 - Suspension Means	8.6.3.2 (Re-Inspection)	x	Suspension ropes are undersized and rouged, need to be replaced. Re-inspection required	2/13/2024
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.2.1 Repair Parts		The “smoke guard” barrier device, that was installed on a number of hoistway door landings, has been activated and not reset properly. The device has been temporarily wrapped up rendering it inoperable in case of an actual emergency. Repair and reset all “smoke guard” barrier devices to operate as designed.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.18 - Restricted opening of car or hoistway doors	2.12.5 Restricted Opening of Hoistway or Car Doors (Re-Inspection)	x	The car door restrictor device shall be adjusted so that it will properly catch and restrict opening of the car doors to a maximum of 4 inches when the car is away from the landing zone. Reinspection is required.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.16 - Traveling cables and junction boxes	2.8.1		The car traveling cable, underneath the car, is cracked through the outer insulation as the car reaches the lobby. Confirm that no internal wires have been affected and repair or replace traveling cable.
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	The testing has not been completed on the elevator at this time. The emergency power testing, door pressure, and unintended motion test before the inspection is completed.

Back