Inspection

Inspection Details

Equipment ID
10614

Inspection Date
10/18/2021

Inspection Type
5 Year Annual Inspection

Inspector Name
Derek Rankin

Mechanic Name
Thomas Moore

Relief Valve Pressure
580

Slide

Governor Rope Pull

Door Closing Force
na

External ID
e7adae4a-099b-4c09-bc32-f0aaeb7bed40

Anheuser Busch- Bldg #215
1 BUSCH PL, SAINT LOUIS, MO
Phone: (314) 577-2667

Attn: 137-2
Anheuser Busch
1 Busch Pl, St. Louis, MO 63118
Phone: (314) 577-3998
Email: ryan.brohammer@anheuser-busch.com

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	3.27 (Hydro) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	Phone inoperative. Repair	9/14/2020
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4		Car does not run contract speed w/load in cab. 67 fpm down w/full load & 46 fpm up w/full load. Valve need to be adjusted so that contract speed of 150 fpm can be achieved
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.2 - Stop switches	2.26.2.21		In car stop switch needs to be tested on fire service phase I recall A17.2 6.1
A17.1-2016 : Elevators	5.15 - Overspeed Valve	8.6.5.16.5		OSV set at 140 fpm with full load in cab. Car is rated for 150 fpm. Does not meet minimum requirements for correct operation. Needs to be set between 165 fpm and 210 fpm. Reinspect required in 90 days
A17.1-2016 : Elevators	5.15 - Overspeed Valve	8.6.5.16.5	x	OSV would not function properly and would only set at 137 fpm, this value should be at least 165fpm. Re-inspection required	10/11/2023

Back