Inspection

Inspection Details

Equipment ID
953

Inspection Date
10/27/2021

Inspection Type
Reinspection

Inspector Name
Timothy Trout

Mechanic Name
Stephen Long

Relief Valve Pressure

Slide
13.25"

Governor Rope Pull
na

Door Closing Force
26

External ID
3ff10e55-3eb4-4ddf-a7d8-dcf31f23a370

Location

Southwest Power Station
FARM ROAD 115 & 164, SPRINGFIELD, MO
Phone: (417) 761-4932

Owner

Attn: Cody Marshall
City Utilities of Springfield
301 E Central St, Springfield, MO 65802
Phone: (417) 831-8492
Email: cody.marshall@cityutilities.net

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
conversion	conversion	n/a		Car door exceeds 30 pounds of torque- Reduce to under 30 pounds	6/4/2019
conversion	conversion	n/a		Replace pit light	6/4/2019
conversion	conversion	n/a		Emergency light and bell doesn't work .	6/4/2019
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	8.11.2.1.1(f) (Insp code) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	Repair the emergency phone as there is no dial tone.	8/6/2020
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)8 Car Lighting		Replace the light tubes in the car ceiling.	8/6/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		Replace the missing braile plates floor 1 and 2	8/6/2020
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		Replace the burnt out light tubes in the machine room.	8/6/2020
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Obtain and display a current state operating certificate in the machine room	8/6/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	x	Replace the worn door gibbs the door is draging	10/27/2021
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)8 Car Lighting		Replace the missing light tubes in the car ceiling.
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	8.11.2.1.3(z)		Replace the badly roughed govenor rope	7/14/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	3.20 - Governor rope	8.11.2.1.3(z)		Replace the very badly rouged governor rope due to excessive rouging.	7/14/2022
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 Maintenance, Repair and Replacements		Replace the compensation rope due to excessive damage to the covering in many places.
MO Minimum : Elevators	(N) - Guide Rails	(N)2		Repair or replace the lower sections of both guide rails due to excessive rusting from standing water in the pit.
MO Minimum : Elevators	(I) - Pits	(I)2		Repair or replace both of the buffers due to excessive rust damage due to standing water in the pit.
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)12 (Re- Inspection)	x	Replace the govoner rope due to excessive rouging and broken wire lays near the bottom .	5/31/2024
MO Minimum : Elevators	(I) - Pits	(I)3		Repair the damaged comp chain jacket, as it has been snagged and damaged.
MO Minimum : Elevators	(I) - Pits	(I)6 (Pit Lighting)		Replace the burnt out pit light.
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)		replace the burnt out light tubes in the machine room ceiling , you are to provide a minimum of 20 ftc at the machine room floor.

Back