Inspection

Inspection Details

Equipment ID
427

Inspection Date
10/25/2021

Inspection Type
5 Year Annual Inspection

Inspector Name
Vincent Daus

Mechanic Name
Phillip Moise, Jr.

Relief Valve Pressure

Slide
7"

Governor Rope Pull
100/520

Door Closing Force
18

External ID
d18de29b-41e7-4e30-bc48-f220da65b499

Location

Maritz Inc
1375 N Hwy Dr, Fenton, MO
Phone: (636) 827-3176

Owner

Attn: Director, Facility Planning
Maritz Inc
1375 N Highway Dr, Fenton, MO 63026
Phone: (636) 827-3232
Fax: (636) 827-3176
Email: bill.wright@maritz.com

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)12 (Re- Inspection)	x	Suspension (Hoist Ropes) are rouged badly, and do not meet manufacturers minimum diameter requirements. The hoist ropes shall be replaced.	3/28/2019
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - Door Systems 8.6.4.13 (Re-Inspection)	x	The car door restrictor shall be operational.	10/25/2021
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)1(A)		Hoist rope and governor rope data tags are missing.	8/8/2023
MO Minimum : Elevators	(H) - Machine Rooms	(H)2		The machine room door shall have a self-locking door and shall be operable from the interior space without the use of a key.	8/8/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.2.2(d) On-Site Documentation (Written Procedures for Evacuation and Cleaning)		A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. Evacuation procedures are missing. (This item is for notification purposes for future violation in 2022)	8/8/2023
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		A current MO state operating certificate shall be displayed in the elevator machine room.	8/8/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6 General Maintenance Methods		The disconnect located in the machine space shall be provided with a sign to identify the location of the supply side overcurrent protective device.	8/8/2023
MO Minimum : Elevators	(I) - Pits	(I)3		Counterweight guards shall extend from a point not more than twelve inches (12") above the pit floor to a point not less than seven feet (7') above the pit floor.	8/8/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.6.7 Signs and Data Plates		Install a code data plate. It shall read: Missouri Minimums	8/8/2023
MO Minimum : Elevators	(L) - Wire Ropes-Hoisting, Governor and Tiller	(L)11		Wedge rope socket is anchored incorrectly. When the steel wire rope has been seated in the wedge socket by the load on the rope, the wedge shall be visible, and at least two wire-rope retaining clips shall be provided to attach the termination side to the load-carrying side of the rope. The first clip shall be placed a maximum of 4 times the rope diameter above the socket, and the second clip shall be located within 8 times the rope diameter above the first clip.	8/8/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems	x	The door restrictor shall be operational.	10/4/2022
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.2.2(b) On-Site Documentation (Procedures for Inspections and Tests)		Need procedures for inspections and test not described in A17.2. (This item is for notification purposes for future violation in 2022)	8/8/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	Elevators that are equipped to operate on emergency power shall be tested with no load in the car while operating on the emergency generator.	10/4/2022

Back