Inspection

Inspection Details

Equipment ID
14166

Inspection Date
1/11/2022

Inspection Type
Annual Inspection

Inspector Name
Ronnie Ritch

Mechanic Name
Timothy Roberts

Relief Valve Pressure

Slide
na

Governor Rope Pull
na

Door Closing Force
18

External ID
98789694-0e66-4ea1-b7c2-58751af483c6

Location

600 Washington Bldg
600 Washington Ave, St. Louis, MO
Phone: (314) 231-2252

Owner

Attn: UNK
Cushman & Wakefield
600 WASHINGTON AVE STE 560, SAINT LOUIS, MO 63101
Phone: (000) 000-0000

Billing

Attn: UNK
Cushman & Wakefield
600 WASHINGTON AVE STE 560, SAINT LOUIS, MO 63101
Phone: (314) 925-2180
Email: tabitha.monroe@cushwake.com

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
conversion	conversion	conversion - reinspect	Yes	No	Doors closing automatically on Phase 2	11/28/2018
conversion	conversion	n/a	No	No	Make appropriate repair in 2 ft. hole in wall of hatch and machine room	2/28/2019
conversion	conversion	n/a	No	No	Terminal slowdown switch box cover missing.	2/28/2019
conversion	conversion	n/a	No	No	Remove wiring from back wall of hoistway at 24th floor	2/28/2019
MO Minimum : Elevators	(K) - Car Platforms and Car Slings	(K)6	No	No	Replace deteriorating safety rod neoprene bushings on car sling.	4/26/2021
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	No	No	Replace deteriorating safety rod neoprene bushings on car sling	6/5/2026
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13.1(l) Means to restrict hoistway/car door opening (Door Restrictors) (Re-Inspection)	Yes	No	Replace missing restrictor angle on the 20th floor hoistway door	1/19/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	No	No	Replace damaged 4x4 electrical junction box on car top and provide cover	6/5/2026
A17.1-2016 : Elevators	2.13 - Governor, Overspeed Switch, and Seal	8.6.4.19.3	Yes	No	Upon performing the required five year full load, the elevator safety governor was found to have an excessive amount of pull-through force. The maximum allowed pull-through force is 925 lbs. Repair or replacement of the governor is required and a reinspection shall be performed before the elevator can be returned to service.	5/6/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	The testing has not been completed on the elevator at this time, the elevator was placed out of service. Only a machine room and hoistway inspection was performed, a full inspection shall be performed before the caregory 5 testing is completed. Reinspection is required.	5/6/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	Need to test to complete Cat 5 test: test car safeties with rated load at rated speed, car buffer at rated speed with rated load, counterweight buffer at rated speed, machine brake with 125% of rated load, cab emergency lighting, alarm bell, 2 way communication, & test elevator for operation on emergency power. Re-inspection required	5/20/2024
MO Minimum : Elevators	(S) - Fire Service	8.11.2.2.6 Firefighters’ Emergency Operation (Re-Inspection)	Yes	Yes	On phase 2 fire service, the car doors would not stay open. Elevator Red-tagged and removed from service. Re-inspection required	5/20/2024
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	Yes	No	Unit appears to have emergency generator backup power, which needs to be tested to complete inspection. Re-inspection required	2/19/2025
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	Yes	No	Need to test elevator for operation on emergency power. Re-inspection required	6/5/2026
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.2.1 Repair Parts	No	No	Need to replace deteriorated safety rod bushings on both sides of the elevator	6/5/2026
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	No	No	Replace damaged 4x4 electrical junction box on car top and provide cover.
A17.1-2016 : Elevators	1.17 - Standby power operation	8.6.4.19.7 (Re-Inspection)	Yes	No	Need to test elevator for operation on emergency power. Re-inspection required.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.15 Car Emg Sys (Phone or alarm not functioning Mandatory Re-Inspection due in 14 days)	Yes	No	When testing the audible signaling device (alarm bell) with the 110V disconnect in the machine room in the “off” position, the device failed to sound, likely indicating that the back-up power device (battery) has failed. Repair for proper operation. Reinspection required.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1- 8.6.4.15 Car Emergency Systems (Emergency Light) (Re-Inspection)	Yes	No	The emergency car lighting is not operational, likely indicating that the back-up power device (battery) has failed. The fixture shall be repaired to operate. Reinspection required.
A17.1-2016 : Elevators	6.3 - Firefighters' service (A17.1-1984 through A17.1a-1988 and A17.3)	8.6.4.19.6	Yes	No	On phase 2 fire service, the car doors would not stay open. Re-inspection required in 14 days.
A17.1-2016 : Elevators	3.22 - Wire rope fastening and hitch plate	8.6.3.3	Yes	No	The dead end hitch has a spring that is broken in the machine room that shall be replaced for the hoisting ropes to have an equal amount of tension. Reinspection required.

Back