Inspection

Inspection Details

Equipment ID
11913

Inspection Date
2/18/2022

Inspection Type
Annual Inspection

Inspector Name
Bradley Rasnake

Mechanic Name
Thomas Moore

Relief Valve Pressure
680

Slide
na

Governor Rope Pull
na

Door Closing Force
22 lbs

External ID
5bdb6cb9-30df-498d-8fe1-7c53dcd16ce2

Location

AmeriStar Casino
1 Ameristar Blvd, St. Charles, MO
Phone: (636) 940-4340

Owner

Attn: AmeriStar Casino- St. Charles LLC
AmeriStar Casino- St. Charles LLC
1260 S Main St, St. Charles, MO 63301
Phone: (000) 000-0000

Billing

Attn: AmeriStar Casino- St. Charles, LLC
AmeriStar Casino- St. Charles LLC
1 Ameristar Blvd, St. Charles, MO 63301
Phone: (000) 000-0000
Email: patmcdonald@boydgaming.com

Violations

Code	Item	Section	Reason For Violation	Fixed Date
A17.1-1996 : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	No current certificate on display.	7/17/2019
A17.1-2016 : Elevators	5.15 - Overspeed Valve	8.6.5.16.5	OSV is not sealed and needs to have a 5 yr full load test. Re-inspection required	3/24/2022
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)	The machine room lighting has been changed to a motion type switch to activate. While this is an energy saving measure, it also is a safety/code concern. Without motion, the switch deactivates the lighting, thereby leaving maintenance personnel with no lighting. Remove motion type switch to a conventional on/off switch.	8/9/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems	The hoistway door at the 3rd landing site guard at the bottom is damaged and shall be repaired.	8/9/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.5.5.2 Oil Leakage Collection	There is no packing gland oil catch bucket in the pit on the machine room side. I plastic hose has been installed that goes directly from the packing gland to the hydraulic oil tank in the machine room. The current adopted code requires “oil loss detection” which cannot be obtained with the current method. A oil catch bucket shall be installed and oil loss shall be recorded in the maintenance control program. The hole in the hoistway/machine room wall shall be sealed to maintain the fire resistance rating.	8/9/2023
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate	The current state operating certificate shall be posted in the machine room in a non-combustible frame.	8/9/2023
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems	The gap around the door and door frame shall not exceed 1/4 inch	3/26/2024

Back