Inspection

Inspection Details

Equipment ID
8377

Inspection Date
5/10/2022

Inspection Type
Annual Inspection

Inspector Name
Curtis Belew

Mechanic Name
Douglas Miller

Relief Valve Pressure
460

Slide

Governor Rope Pull

Door Closing Force
18

External ID
49fa0251-1a0b-48d2-a424-76bb967b5d8f

Location

Plaza One Office Center
502 Earth City Plz # 504, Earth City, MO
Phone: (314) 209-0861

Owner

Attn: David Glarner
Pintail LLC
PO Box 179173, St. Louis, MO 63117
Phone: (314) 865-5700
Email: Jane@glarnerstl.com

Billing

Attn: David Glarner
Pintail LLC
PO Box 179173, St. Louis, MO 63117
Phone: (314) 865-5700
Email: mail@glarnerstl.com

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Display current state operating certificate.	6/12/2019
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.1.6.3 Controllers ,Wiring and Wiring Diagrams		A legible copy of the schematics shall be kept in the machine room.	7/22/2020
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.1.4 Maintenance records		A code compliant MCP and all the on-site documentation required by A17.1 2016 - 8.6.1.2.2 and 8.6.1.4 shall be provided in the machine room. (This item is for notification purposes for future violation in 2022)	5/11/2021
MO Minimum : Elevators	CSR 40-5.100 State Operating Certificate	5.100(2) Display of Operating Certificate		Up to date operating certificate required in the machine room.	8/2/2023
MO Minimum : Elevators	(H) - Machine Rooms	(H)9	x	Each elevator having polyphase alternating current power supply shall be provided with means to prevent the starting of the elevator motor if: (A) the phase rotation is in the wrong direction; or (B) there is a failure of any phase.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts	x	A Roust-a-bout fitting located below the hydraulic tank is leaking and shall be replaced with an approved grooved or threaded fitting (Roust-a-bout fittings are no longer allowed on elevators).
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x	The plunger gripper is due to be tested with a full load this year.
MO Minimum : Elevators	(O) - Existing Hydraulic Elevators	(O)4 (Re-Inspection)	x	The pump motor belts shall not slip under load.

Back