Inspection

Inspection Details

Equipment ID
11047

Inspection Date
8/25/2022

Inspection Type
Reinspection

Inspector Name
Cynthia "CJ" Brady

Mechanic Name

Relief Valve Pressure
NA

Slide

Governor Rope Pull

Door Closing Force
NA

External ID
e613ff8f-85fb-4c0f-ac2d-8ae7860f340a

Location

Lifetime Fitness
3058 Clarkson Rd, Ellisville, MO
Phone: (000) 000-0000

Owner

Attn: LTF Club Operations, Inc.
LTF Club Operations, Inc.
2902 Corporate Pl, Chanhassen, MN 55317
Phone: (000) 000-0000
Email: licensing@lt.life

Billing

Same as Owner

Violations

Code	Item	Section	Reinspection	Reason For Violation	Fixed Date
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	5.1 - Pit access, lighting, stop switch, and condition	2.2.2 Design and Construction of Pits		8.11.3.1.5(a) - Repair or replace the sump pump in the pit. (when the sump pump is plugged in, it will not shut off).	8/31/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.40 - Maintenance Records	2.26.1.4 Inspection Operation		Provide MCP.	8/31/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.40 - Maintenance Records	2.26.1.4 Inspection Operation		8.6.10.1 - Provide a completed fire service testing log on-site.	8/31/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	2.3 - Lighting and receptacles	8.11.2.1.2(c)		8.11.3.1.2(c) - Machine room lights/light switch not working properly and shall be repaired or replaced.	8/31/2020
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	1.6 - Car emergency signal	3.27 (Hydro) Phone or alarm not functioning (Mandatory Re-Inspection due in 14 days)	x	The in car emergency telephone shall be operational.	8/25/2022
ASME A17.1 2004 with 2005 Addendum and 2005 : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing		This elevator is equipped with an overspeed valve that was last tested in 2008. The overspeed valve shall be tested with the rated load on or before the next annual test.	9/5/2023
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing (Re-Inspect)	x	Full load testing of the overspeed valve shall be completed within 90 days.	9/5/2023

Back