Inspection

Inspection Details

Equipment ID
2812

Inspection Date
9/20/2018

Inspection Type
Annual Inspection

Inspector Name
Michial Linenfelser

Mechanic Name
Marcus Geno

Relief Valve Pressure
320

Slide

Governor Rope Pull

Door Closing Force
24

External ID
f728c58f-68a5-45ce-b2db-6d27d7557ed0

Location

SSM-St. Joseph Health Center
300 1ST CAPITOL DR, SAINT CHARLES, MO

Owner

SSM St. Joseph Health Care
300 1ST CAPITOL DR, SAINT CHARLES, MO 63301-2844

Billing

Attn: SSM St. Joseph Health Care

300 1ST CAPITOL DR, SAINT CHARLES, MO 63301-2844

Violations

Code	Item	Section	Reinspection	Red Tag	Reason For Violation	Fixed Date
MO Minimum : Elevators	(K) - Car Platforms and Car Slings	(K)4			Provide & install crosshead data plate with manufacturer name, date of installation, speed & rated capacity stamped on it.	10/14/2025
MO Minimum : Elevators	(H) - Machine Rooms	(H)2			Machine room door shall be self closing and locking	10/14/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	(G)1 - 8.6.4.13 - Door systems			Door closers at top and bottom floors are not working	10/14/2025
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts			Repair / replace ventilation fan in car	10/14/2025
MO Minimum : Elevators	(B) - Car Enclosure: Passenger	(B)11 Phone or alarm not functioning ( Mandatory Re-Inspection due in 14 days)	x		Emergency phone in car is not working on auxiliary power. Re-inspection required	10/14/2025
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	(3) Testing Procedures (Re-Inspect)	x		Provide & install test tag permanently marked with test data on all appropriate equipment. Re-inspection required	10/14/2025
MO Minimum : Elevators	(I) - Pits	(I)1			Pit has had 9 inches of oil / water, has possible black mold. Pit needs to be cleaned ad mold abated. Recommend after cleaning remove any rust from equipment and apply rust inhibitor to prevent any further damage to equipment
MO Minimum : Elevators	(H) - Machine Rooms	(H)5 (Machine Room Lighting)			Repair existing lighting in machine room and provide for additional lighting if needed to provide required 10 fc minimum illumination at floor in front of controller
MO Minimum : Elevators	(H) - Machine Rooms	(H)8			Need to install cover on 4x4 electrical box in corner by disconnect switches and enclose all exposed wiring.
MO Minimum : Elevators	(G) - Maintenance, Repair and Replacements	8.6.3.1 Replacement Parts			Replace leaking Victaulic fittings as needed in pit and machine room
MO Minimum : Elevators	11 CSR 40-5.090 Inspection and Testing	8.6.5.16.5 Over Speed Valve Testing (Re-Inspect)	x	x	OSV failed testing, needs repaired. Red-tagged and removed from service. Re-inspection required
MO Minimum : Elevators	(H) - Machine Rooms	(H)2			Machine room door shall be self closing and locking

Back