|
A17.1-1996 : Escalators
|
7.3 - Handrails
|
802.2
|
|
|
Left side handrail needs to be replaced. It has cracks in it.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
8.12 - Steps, step chains, and trusses
|
1206.6
|
|
|
Entire truss needs to be cleaned out.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
8.12 - Steps, step chains, and trusses
|
802.7
|
|
|
Replace broken step teeth as needed.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
8.12 - Steps, step chains, and trusses
|
802.8
|
|
x
|
Step chain clearances do not meet requirements.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
8.4 - Drive machine and brake
|
804
|
x
|
x
|
Brake does not meet minimum brake torque.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
7.15 - Balustrades
|
802.3
|
|
|
Bottom deck guards are wrong height and distance from handrail.
|
10/10/2019
|
|
A17.1-1996 : Escalators
|
7.3 - Handrails
|
802.4
|
|
|
Replace right handrail due to excessive wear.
|
10/25/2019
|
|
conversion
|
conversion
|
n/a
|
|
|
Clean down truss
|
10/10/2019
|
|
Missouri Minimum : Escalators
|
(T) - Existing Dumbwaiters, Escalators and Moving Walks
|
8.6.8.13 Escalator Cleaning
|
|
|
Need to perform clean down of unit
|
|
|
Missouri Minimum : Escalators
|
(T) - Existing Dumbwaiters, Escalators and Moving Walks
|
8.6.8.7 Rollers, Tracks, and Chains
|
x
|
x
|
Unit has stress crack in lower end step track, Red-tagged, Re-inspection required
|
|
|
Missouri Minimum : Escalators
|
(T) - Existing Dumbwaiters, Escalators and Moving Walks
|
8.6.8.6 Steps
|
x
|
|
Two steps have broken nose pieces, replace same
|
|
|
Missouri Minimum : Escalators
|
(T) - Existing Dumbwaiters, Escalators and Moving Walks
|
8.6.8.1 Escalator Handrails
|
x
|
x
|
Left handrail has cracks / pinch points, replace same. Red-tagged, Re-inspection required
|
|
|
Missouri Minimum : Escalators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
x
|
|
Need to perform step indexing to complete inspection. Re-inspection required
|
|
|
Missouri Minimum : Escalators
|
11 CSR 40-5.090 Inspection and Testing
|
(3) Testing Procedures (Re-Inspect)
|
x
|
|
Need to perform testing of all comb impact devices to complete inspection. Re-inspection required
|
|